Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series gearbox input shaft bearing replacement

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 20
Joined: Tue Jul 05, 2005 11:50 am

80 series gearbox input shaft bearing replacement

Post by TurboRA28 »

Hi all, I am thinking the input shaft bearing in my 80 series gearbox is on the way out.
If I pull the box out can this bearing be replaced without stripping the box apart, like is it accessible from the front of the box?
Thanks
Joel
Top
Posts: 1383
Joined: Tue May 06, 2008 8:12 pm
Location: Newcastle

Post by oldmate »

You have to dismantle the box. the bearing is pressed onto the input shaft.
Top
Posts: 417
Joined: Wed Jul 13, 2005 8:30 pm
Location: NSW

Post by Modified Toy »

unless you have a puller that pulls the bearing out via the circlip groove :cool:
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests