Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

engineering required for wagon chop?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 56
Joined: Wed Feb 01, 2006 8:18 pm
Location: Gladstone, Queensland

engineering required for wagon chop?

Post by Timmeh »

Hi all, i have an 80 series i am thinking of cutting to a ute, but was wondering what would be required engineering wise to get it passed, what are the major points of interest to the engineer?? I know this conversion is very common so it can be done with no worries, oh yeah i am in qld so if that makes much difference? Thanks

Tim
Redline is made for a reason!!
Top
Posts: 360
Joined: Fri Nov 11, 2005 11:54 pm
Location: Shellharbour

Post by BUSTED100 »

you know your going to have it engineered due to the body mods etc ... so just contact the engineer your going to use and ask what they require
*T/D 80 Saharra - SOLD *V8 100 GXL - SOLD
* 105 - CHOPPED, LOCKED & ROLLED see build up http://www.outerlimits4x4.com/viewtopic.php?f=16&t=167093&hilit=busted100
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: engineering required for wagon chop?

Post by bogged »

Speak with an engineer. Get the facts from them
Top
Posts: 19
Joined: Mon May 18, 2009 6:46 pm
Location: Canberra

Post by nelpd96 »

Call QLD transport and get the number for Michael McMillan, he is in Townsville but happy to travel and has done a few of these before. I don't have his new number on me at the moment
Top
Posts: 56
Joined: Wed Feb 01, 2006 8:18 pm
Location: Gladstone, Queensland

Post by Timmeh »

thanks i will try and find his number and see what i can find out, thanks for the replies
Redline is made for a reason!!
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 53 guests