Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
birfeild rings
birfeild rings
Anyone still run them?
do they help?
I 've been offered a pair of cvs with them installed and working out if worth it and how much clearancing inside the knuckle is needed.
ta
do they help?
I 've been offered a pair of cvs with them installed and working out if worth it and how much clearancing inside the knuckle is needed.
ta
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
I run them and have had no issues with cvs and front locker.
my zook was on 32 mongrels but ive just changed to 34 swampers so heres hopeing.
if you own a die grinder they take around 5 minutes per side to clearance, your only removing a little bit more than some casting marks maybe 1.5 mm in the corners.
its a good chance to rebuild your hubs and repack you wheel bearings.
they would have to be a hell of a lot stronger than no rings,maybe not 26 spline cromoly strong but a lot better.
my zook was on 32 mongrels but ive just changed to 34 swampers so heres hopeing.
if you own a die grinder they take around 5 minutes per side to clearance, your only removing a little bit more than some casting marks maybe 1.5 mm in the corners.
its a good chance to rebuild your hubs and repack you wheel bearings.
they would have to be a hell of a lot stronger than no rings,maybe not 26 spline cromoly strong but a lot better.
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
so 100 for a pair installed is worth it then. hrm
i have another axle to replace my broken one going in now but be good to buy now as cheap and good for next upgrade when i blow them again eheh
i have another axle to replace my broken one going in now but be good to buy now as cheap and good for next upgrade when i blow them again eheh
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Anyone got any installation pics? mainly of the grinding needed or what is the easist way to work out where they are needed to clearance.
i am grabbing a pair for $50 inc cvs/axles with minimal use.
i am grabbing a pair for $50 inc cvs/axles with minimal use.
[url=http://www.outerlimits4x4.com/viewtopic.php?p=930942#930942&highlight=]Zook[/url]
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
U SUK Zook Built and Sold.
New rig is 97 80 DX. 2" list 33s
Who is online
Users browsing this forum: No registered users and 9 guests