Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

where else could it be leaking

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

where else could it be leaking

Post by matthewK »

i got a really really slow oil leak on the right hand side of my 1996 disco
where its dripping off is 2 small pips where the bolt either side of the oil filter i can sort see some on the side of the bottom of the head

i just replace rocket cover gaskets where it was flowing out as the bolt were finger tight

and im having a really really bad time with the spark plug leads i just cant work it out, iv been reading a manual < discovery workshop manual>
putting it in the right orientaion but the motor just keep turning

can somone shed some light on this, im getting to the point where im going to pay some mechanic far too much to come to my house to fix the problem

id even thinking about chucking a 6pack of jim beam or jack dsw to fix the problem
1995 land rover disco on 265 muddies
Posts: 3278
Joined: Mon Mar 03, 2003 9:03 pm
Location: St Helena, Melbourne.

Post by Loanrangie »

If you have a manual its pretty easy, line up TDC using timing marks and romove no 1 plu to check its at tdc, put a lead on number 1 cyl and start from there going clockwise around the cap in the firing order.
Saddle up tonto, its the not so loanrangie! . 98 TDI DISCO lightly modded with more to come.
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

put the motor on TDC and then set up the leads Clockwise 1 2 7 5 6 3 4 8

number 1 piston is R/H side front (stand in front of motor / air cleaner side)

cylinders are arranged , Passenger side 1, 3, 5, 7.
drivers side, 2, 4, 6, 8.
Warn - Dont leave home without it
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Post by matthewK »

i dont have a manual look if one of you guy could get a photo of the the leads and number them for me post it up that be great

i downloaded some other manual but leads are right out by going by what it said its told me

1-8-4-3-6-5-7-2 but dosent start up at all
1995 land rover disco on 265 muddies
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Post by matthewK »

Loanrangie wrote:If you have a manual its pretty easy, line up TDC using timing marks and romove no 1 plu to check its at tdc, put a lead on number 1 cyl and start from there going clockwise around the cap in the firing order.

after few go's i got it right and running
i use your meoth loanrangie was dead simple and order is as is follows
1 8 4 3 6 5 7 2
i had them all one plug hole out to far forward

cheers guys for ya help
1995 land rover disco on 265 muddies
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

:oops: sorry just goes to show you never can trust what you read on the interweb. I picked up the firining order off another forum.

note to self - check facts before posting
Warn - Dont leave home without it
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Post by matthewK »

mate honestly i found several online, even went thro myowners hand book few times wasnt until the 10,0000 time as well as someone on thehttp://www.aulro.com/
forums thats i found the corect one :) anyways she all fixed up running quiet good on both petty and gas, problem with the gas wasnt getting enough, i had a mechanic tune it all up for me :)
1995 land rover disco on 265 muddies
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests