Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Guard Cut

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Contact:
Contact WelchyGQ

Guard Cut

Post by WelchyGQ »

Just wondering if anyone has a guide or instructions to cut the guards for my gq. The tyres scrub in the back of the front guard when turning.
was just goign to cut with angle grinder or tin snips but need to still run a flare and didnt want to leave a sharp edge.

Cheers,

Welchy
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Top
Posts: 860
Joined: Sat Mar 07, 2009 1:14 pm
Location: Newcastle

Post by ethann »

If you leave like say 5-10mm extra you can bend the edge over and make it look heaps neater, and not have a sharp edge.
Team Lock n load.
www.facebook.com/locknloadaustralia
Top
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Contact:
Contact WelchyGQ

guards

Post by WelchyGQ »

yeah i was thinking that but i dont know if it would roll properly if i bend it with a pair of pliers or something
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Top
Posts: 942
Joined: Sun Jul 06, 2003 8:41 pm
Location: All Mav'ed up!!! (Melbourne)

Post by marin »

Radius arm spacers?
Rum injected

TD42T shorty... got some bolt on and some custom stuff.

Read about it [url=http://www.patrol4x4.com/forum/showthread.php?t=18848]here![/url]
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

I cut the lips off leaving the radius edge on then cut off the required amount from the guards. Then weld the lip back on, prime, spray putty, undercoat then paint................................and looks factory ;) Your factory flares and mudflaps wont fit back on though, thats where flexi flares come in.
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Posts: 126
Joined: Sun Jul 20, 2008 6:57 pm
Location: Frankston

Post by SWBMQCraig »

Sorry to sound like bogged but search!

http://www.outerlimits4x4.com/ftopic155633-0-0-asc-.php

Slunnies instructions are very useful!

Cheers

Craig
Top
Posts: 43
Joined: Sat May 14, 2005 4:51 pm
Location: Christchurch, NZ

Post by albundy »

Why don't you just fit radius arm spacers and move the front axle forward 15mm.
rain, hail, sleet or snow, we go!
Top
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Post by gq351 »

just found this that i posted ages ago!! might help...

the easyest way is 2 get go round the edge of the gaurd & quarter with 10mm masking tape,cut it on that line with a jigsaw & make the bottoms about 25mm more,, then run 15mm masking tape on that line & fold it over to the tape line with a hammer & dolly for your flares to screw on to, the front is easy but the quarters are abit more tricky coz of the inner, but still not 2 bad,just seal it with some urathane to stop water getting between the 2 panels,, with that measurment the flare sits right on the body line & looks good,,

cheers jess...

Image
Image
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 120 guests