Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

40 series diff width

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 316
Joined: Thu Jan 10, 2008 5:24 pm
Location: QLD

40 series diff width

Post by Ridge »

i have done a search on google and found that the 40 series cruisers are 65.6" wide.
i could not find out if this was the measurement from hub to hub,
or from the outside of the wheel arches. Would someone be able to confirm it for me?

Also is the standard tyre a 32x10.5?



cheers
andrew
4age zook ute in lots of bits
Top
Posts: 75
Joined: Fri Jan 09, 2009 8:04 pm
Location: Moranbah

Post by trev1 »

I'm pretty sure standard tyres were 7.50x16. In standard form they used to be pretty rough so most people used to put fatties on to tame the rough. I just measured my 47 series ute for you and got 1415mm (as best I could with the wheels on). This was from the wheel mount to the wheel mount.
Top
Posts: 316
Joined: Thu Jan 10, 2008 5:24 pm
Location: QLD

Post by Ridge »

thank you much appreciated.
4age zook ute in lots of bits
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 25 guests