Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Sluggy 3Y, fix or replace??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Sluggy 3Y, fix or replace??

Post by dans-paj92 »

hey all,
I have a 3Y carby motor in my 1984 4runner.
It has stock 4.88 diff ratios in it.
Have put a new fuel filter and sprayed heaps of carby cleaner in it.
New air filter in it.
Only has done 166000 kms on it. Hasnt been rebuilt though.
Is it worth changing the coil, leads and spark plugs??
Or should i save up and put a bigger and better motor in it?
I am running 35inch muddies on it.
I have a rebuilt 2.4D motor just sitting in another hilux atm.
Is it worth throwing that in and turboing it??
Cheers
Dan
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Post by dans-paj92 »

Coming home from yalwal on the weekend, fully loaded with camping gear.
It was doing a max of 120km/h on the highway and 3rd gear 60km/h at 3000rpm coming up mt.uzely or however you spell it??
So will a 2.4TD be any better??
and it would be a max of $3000 for a diff motor to go in and can only be off the road for a week.
Cheers
Dan
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Posts: 207
Joined: Thu Sep 20, 2007 4:37 pm
Location: victoria

Post by johno88 »

a 2.4td may go better, but with 3k id go a 3rz you wont regret it.
Posts: 42
Joined: Sun May 31, 2009 9:37 am
Location: Seaford Meadows, SA

Post by Alan 4Runner »

I have a 3Y gen 1 runner also..
I have trouble getting to 120km/h with only a bit of gear in it running 31's :bad-words:
Doubt the old girl would top 100 with 35's, especially with the speedo discrepancy!!
I've nearly finished the "gathering parts" stage of a 7M-GE conversion :armsup:
7M-GE = twin cam 3.0 EFI
Spent so far - <$500.00
2" Spring Lift, Custom Rear with Swing-Away Spare, Rear Lokka & Awesome Black Sunnies!!
To-Do list:
Custom Sliders & Tube Winch Bar
2.5 litre Twin Turbo 6cyl Conversion :armsup:
Posts: 48
Joined: Mon Mar 14, 2005 6:52 am
Location: New Zealand

Post by jafa »

Alan 4Runner wrote:I have a 3Y gen 1 runner also..
I have trouble getting to 120km/h with only a bit of gear in it running 31's :bad-words:
Doubt the old girl would top 100 with 35's, especially with the speedo discrepancy!!
I've nearly finished the "gathering parts" stage of a 7M-GE conversion :armsup:
7M-GE = twin cam 3.0 EFI
Spent so far - <$500.00
You wont regret putting the 7m in, my 85 Surf has had this motor for a couple of years now, no issues, heaps more power, uses a little less gas than the 3y did, tows great. Only issue is that for some reason rear tires wear much faster :D
'85 Hilux 3rz, duals, 4.7's,6stud histeer,Racerunners up front, coils rear , 30spl longs, on 40" Iroks

[url=http://www.snr4x4.co.nz][size=200][color=red][i]SNR4x4[/i][/color][/size][/url]
Posts: 117
Joined: Thu Mar 23, 2006 4:48 pm
Location: Redbank Plains

3y...

Post by error »

Its a 3y....
Its not built for speed..
Its an 'A' to 'B' motor, it will get you any where you want, even if you never service it, it will just keep going, just dont ask it to do it quickly..
If you want to go fast get a sports car...
If you want to load up get a B-double..
Just want to play...........
Posts: 42
Joined: Sun May 31, 2009 9:37 am
Location: Seaford Meadows, SA

Post by Alan 4Runner »

Yeah that's true, they are bulletproof!

I just get tired of filling it up to the tune of $70 every 300-320km

If I'm only gonna get ~300km to a tank I'd like to get places a bit faster!
2" Spring Lift, Custom Rear with Swing-Away Spare, Rear Lokka & Awesome Black Sunnies!!
To-Do list:
Custom Sliders & Tube Winch Bar
2.5 litre Twin Turbo 6cyl Conversion :armsup:
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Post by dans-paj92 »

so whats a 7M-GE motor?? and what car are they in??
and how hard is it put in??
cheers
Dan
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Posts: 33
Joined: Tue Jun 23, 2009 8:46 pm
Location: SA

Post by Tonka tuff 4x4 »

yeah mate i have a 3y in mine and i am just about to install a supercharger on.. mine is a stock engine but has a weber carby... so your old girl goes well with 35's on it? what about up hill?
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Post by dans-paj92 »

And yeah mate, i had the tom tom in the car and i top out at 120km/h with 35 muddies on her. The speedo reads 102km/h on the dash.
Cheers
Dan
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Posts: 42
Joined: Sun May 31, 2009 9:37 am
Location: Seaford Meadows, SA

Post by Alan 4Runner »

7M-GE is a Toyota 6
3 litre twin cam EFI
Found in 89-91 Cressidas (MX83) and Supras (MA70)
Not sure how easy to put in but if you google the conversion a fair few people have done it..
Their downfall is they are prone to head gasket failure but that can be overcome by using a better gasket and getting aftermarket head studs and torqueing them up an extra ~15lbf
2" Spring Lift, Custom Rear with Swing-Away Spare, Rear Lokka & Awesome Black Sunnies!!
To-Do list:
Custom Sliders & Tube Winch Bar
2.5 litre Twin Turbo 6cyl Conversion :armsup:
Posts: 445
Joined: Fri Jul 13, 2007 12:58 pm
Location: Mount Annan

Post by dans-paj92 »

Yeah i was gonna go a weber carby and a supercharger but stupid RTA rules on P platers.
My one with 35's on her going up hills depending on how big they are..
Did a trip to Colo River out from windsor and there was only one hill that i had to drop down to 2nd and 45km/h. Other than that other steep hills it will hold 3rd at 3000rpm and cruise up them at 60-70km/h, and if im lucky on the odd occasion i can get up hills in 4th at 80km/h.
cheers
Dan.
'84 4Runner, 2.4TD, 12psi Boost, 4" Suspension, 2" Body, 4.88's, 35's, Narva Spotties, Winch, Power Steering, MTX Sub, Racing Seats, Front Auto Lokka, Crawler Gears
Posts: 33
Joined: Tue Jun 23, 2009 8:46 pm
Location: SA

Post by Tonka tuff 4x4 »

when you get off ya p plates put a weber carby on it cos at 3000rpm you can nail it and the secondies kick in and just raws up the hill and sound so nice and solid aswell. :lol: :D
Posts: 42
Joined: Sun May 31, 2009 9:37 am
Location: Seaford Meadows, SA

Post by Alan 4Runner »

Hey Tonka,
What weber carb are you running on yours?
I'm thinking of finding a cheap one at a wreckers to use before I begin my conversion..
Also, do you need to run extractors?
Cheers
Alan
2" Spring Lift, Custom Rear with Swing-Away Spare, Rear Lokka & Awesome Black Sunnies!!
To-Do list:
Custom Sliders & Tube Winch Bar
2.5 litre Twin Turbo 6cyl Conversion :armsup:
Posts: 227
Joined: Sat Dec 01, 2007 11:56 pm
Location: vic

Post by gq351 »

just put a V8 in it :D :D easy fix!!!
GQ patrol '454' Big Block Chevy 7''lift 37'' muddies & heaps more...
Post Reply

Who is online

Users browsing this forum: No registered users and 19 guests