Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Warn High Mount Mods / Buildups / Pics

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 65
Joined: Mon Jan 07, 2008 1:24 pm
Location: Victoria

Warn High Mount Mods / Buildups / Pics

Post by noodle »

As the titke suggests lets get some buildups / pics of the mods you have performed to your highmounts.

I havent done any yet but heres a link from another forum

http://forums.lr4x4.com/index.php?showtopic=1522
Top
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

I'll sell you mine.
wide drum (80m of 10mm rope), free spool, breathers etc etc
twin 7.8hp 24v motors, (Flamin Fabs) plus adapter for 6hp Warn motors.
complete solenoids, cables etc for each motor,
plus twin 25 plate batteries and 70 amp 24v altenator.

I'm going hydraulic so don't need it anymore!

NZ$5,000 ie half replacement cost!
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Top
Posts: 65
Joined: Mon Jan 07, 2008 1:24 pm
Location: Victoria

Post by noodle »

Thanks but im not looking to buy one.


Im looking to mod my own and interested in seeing others
Top
Posts: 217
Joined: Thu Jun 01, 2006 1:40 pm
Location: Kalgoorlie WA

Contact:
Contact WelchyGQ

winch

Post by WelchyGQ »

so thats only like 3800 AUS isnt it?
97 TD42 Y60 Coil Cab. 2" Body lift. 4" Spring 35" Maxis Creepies, 33" Claws, F and R lockers,Tube winch Bar, Custom Tray, Hi Mount with 6HP Motor, Sill cut, MTQ turbo
Gladstone4wdclub.com.au
Top
Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

5,000.00 NZD = 3,965.85 AUD
New Zealand Dollars Australia Dollars
1 NZD = 0.793169 AUD 1 AUD = 1.26076 NZD
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

Darin you could have made this offer 12mths ago. Could have saved me a fortune.
THOUGHT FOR THE DAY....
Top
Posts: 161
Joined: Wed Sep 14, 2005 4:57 pm
Location: Auckland, NZ

Post by NZ4x4 »

What are you going to run for your backup winch Darin?
[b]86 Nissan MK Patrol[/b] - In bits atm, be back together soon
[b]MWB GQ Patrol[/b] - Being built, 383 chev, coilovers, etc

[url]http://www.kiwiracing.co.nz[/url]
Top
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

I'll stick a 9000 12v low mount in. Not really worried about a back up but it will be there to get back on the hweels when i roll it and that is about it.
With the hydro we are doing we don't expect any trouble. A LOT simplier than what every one I'veseen over here so far and everuthing will be standard off the shelf parts.
I imagine quite a few will follow suit and i know of at least one other truck that is currently building the exact same system but with a slightly smaller pump.
Can't say anymore than that as i want to have an advantage for at least one comp.

PS Sam when are you getting the the 'new' truck finished????
Last edited by nzdarin on Sat Jul 04, 2009 7:16 pm, edited 1 time in total.
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Top
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

turps wrote:Darin you could have made this offer 12mths ago. Could have saved me a fortune.
If we had figured out this winch and a sponsor had said do it sooner then i would have. Such is life sometimes I guess! :roll:
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

nzdarin wrote:
turps wrote:Darin you could have made this offer 12mths ago. Could have saved me a fortune.
If we had figured out this winch and a sponsor had said do it sooner then i would have. Such is life sometimes I guess! :roll:
Now I am going to have to watch what you doing now and buy those bits.
THOUGHT FOR THE DAY....
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 8 guests