Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

rb 30 repower what engine

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 4
Joined: Tue Apr 21, 2009 12:37 pm
Location: Glasshouse

rb 30 repower what engine

Post by Red GQ »

Well it looks as if I have killed the gq well the rb30 anyway just wanting any ideas what would be an relitavely easy replacement motor to fit I want more power cheers darren
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

Same motor but use the turbo version out of the VL Commodore ( if you can get a decent one)
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

vlt is a cheap way to get some extra herbs, especially if you can get a whole motor for under a few grand

If you use the NA, have a good look around, as its been done to death on calais.com

Also, one tip, if your going efi rb30, get the loom out of the nissan skyline, as its a separate unit, and easier to wire in.
Nice gq swb ute chop with a huffer for the good times
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

Spool imports are releasing a 3.4 stroker for the RB30 soon
http://www.mothfukle-engineering.com/
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

As above would be easiest as no box change needed. Or if you want more cubes look at a Ford 6 or 350 chev ect. I'm not a big fan of 5 litres, they lack bottum end torque. Other choise do a box swap and use a tb or td. Commo 3.8's go ok but are not the best for the swap, crank angle sensor is at the bottum of the crank and don't do that well in a commo let alone a dirty patrol.
Posts: 1081
Joined: Sun Jul 20, 2003 10:43 pm
Location: Melbourne

Post by B.D.R »

Go the RB30et out of a VL.

I have one in mine, it has more than enough power :D .

These motors are cheap to get power out of, and there is a wealth of knowlage on calaisturbo.

You will need to get the complete Fuel system from the donor car though, as well as the engine loom, and Computer
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

brad-chevlux wrote:Spool imports are releasing a 3.4 stroker for the RB30 soon
That could be cool, a bit of extra torque is just what you want.
This is not legal advice.
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

chimpboy wrote:
brad-chevlux wrote:Spool imports are releasing a 3.4 stroker for the RB30 soon
That could be cool, a bit of extra torque is just what you want.
i was thinking RB34DE/T But i'm bias i like the twincam conversions
http://www.mothfukle-engineering.com/
Posts: 39
Joined: Sat Jan 03, 2009 7:28 pm
Location: Caboolture

Post by RED NISS »

get a td42
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

supercharged fuel injected alloy 502ci.
add NOS if your not happy
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

brad-chevlux wrote:Spool imports are releasing a 3.4 stroker for the RB30 soon
Hmmm...think I might just hang onto my vl turbo now... :twisted:
Post Reply

Who is online

Users browsing this forum: No registered users and 106 guests