Am currently looking to buy an NG wagon with the 4D56TI motor.
Not too many around locally, and I dunno just like the old style & the bonnet scoop
Seller says it prob needs turbo rebuild & injectors done
I am an industrial sparky and when younger always had older cars & tinkered with them
Is the above work, say new seals etc in a turbo and pulling out injectors to get them recond doable for someone at home?
I have the tools but not really worked on diesel before
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
NG question re turbo & injectors
Moderator: -Scott-
I have owned Paj's for about 8 years now (all TD) and I currently own the one that you described (2.5L TDI, bonnet scoop, older shape) but I have never really touched the stuff you mentioned. Just to give you an idea, back in 2005, my older TC05 turbo (from my previous NA Pajero) cost me about $750 to change with a recon unit. At the same time, my fuel injectors cost me around $100 each to recondition. It was explained to me that you can replace the fuel injectors with new ones, but they would cost you $400-$500 each. I'm sorry I cant be of any more assistence with the actualy hands-on stuff with these parts, but i'm sure that there's somebody who can!
1990 NG Paj TDI: 2.5 exhaust, 146l Longranger tank, snorkel, 2" suspension lift, 31" Bighorns.
1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
1985 Holden Drover: 2" OME suspension & shocks, extractors, 2" exhaust, 235/75 MTR's
Cheers Sammyboy for the replySammyboy wrote:I have owned Paj's for about 8 years now (all TD) and I currently own the one that you described (2.5L TDI, bonnet scoop, older shape) but I have never really touched the stuff you mentioned. Just to give you an idea, back in 2005, my older TC05 turbo (from my previous NA Pajero) cost me about $750 to change with a recon unit. At the same time, my fuel injectors cost me around $100 each to recondition. It was explained to me that you can replace the fuel injectors with new ones, but they would cost you $400-$500 each. I'm sorry I cant be of any more assistence with the actualy hands-on stuff with these parts, but i'm sure that there's somebody who can!
As it is car has been sold out from under me....
Who is online
Users browsing this forum: No registered users and 0 guests