Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ Gear Box

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 51
Joined: Fri Nov 14, 2008 2:20 pm
Location: Newborough

GQ Gear Box

Post by team_little_legs »

Gday everyone im interested in fitting a gq gear box and transfer into my rover, has any one done it and how much work is involed fitting it ?
Posts: 3064
Joined: Sun Jun 12, 2005 11:00 pm
Location: Yinnar South, Vic

Post by cloughy »

Will let you know, when I fit the 454, with GQ running gear, to a 110" I have here, wont be till towards the end of the year but :cry:
Wanted: Car trailer or beaver tail truck, let me know what you got
Posts: 168
Joined: Fri May 11, 2007 10:51 pm
Location: Toowoomba Queensland

Post by Braudy »

I have a nissan 5 speed /LT230 conversion sitting in the shed I've never got around to fitting. And looking at it, and the associated parts I'm guessing you'd be up for.

1. gear box to engine adapter or bellhousing.
2. tail shafts
3. gearbox to chassis mounts.
4. speedo cable
5. body lift

I,d imagine if you were planning on using a nissan gearbox and transfer and keeping the range rover diffs , you would run into rear tailshaft angle problems . Similar to doing the opposite ( ie rover gearbox and nissan diffs ) witch has vibration issues from what I understand.


I'm sure I've missed a lot , but thats a start.

I'll be interested to hear more on this because I'm thinking of replacing my entire driveline with nissan running gear.

Cheers


Braudy
V8 beats gravity

If you cant buy it , Make it !

Bob tail Rangey
Posts: 248
Joined: Tue Mar 30, 2004 3:44 pm
Location: Sydney Australia

Post by zuffen »

I have the Nissan 5 speed behind a Lexus engine in my RR.

I also run Patrol axles.

I doubt I can break them even with 35" tyres.

At this stage the trans has survived 550lbft torgue and I'm about to up it a bit more.
Cheers,

Zuffen

There's no such a thing as too much horsepower
Posts: 1175
Joined: Wed Jul 27, 2005 10:17 pm
Location: Mirboo North

Post by 6.5 rangie »

theres a conversion on ebay forsale now, is it yours Braudy?
Damien


--------------------------------------------------------
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

got a link? i cant find it on there, ive been looking for one...

Otherwise does anyone know of people doing gq 5 speed to lt230 kits?
Posts: 168
Joined: Fri May 11, 2007 10:51 pm
Location: Toowoomba Queensland

Post by Braudy »

Yeah that's mine .

I was going to put it in when I got a front maxi . But that seems a little unlikely now with maxi drive being no more , and the chances of getting a second hand one are buggar all. So I decided to go in a different direction with the entire driveline.

Cheers

Braudy
Last edited by Braudy on Thu Jul 02, 2009 8:49 pm, edited 1 time in total.
V8 beats gravity

If you cant buy it , Make it !

Bob tail Rangey
Posts: 51
Joined: Fri Nov 14, 2008 2:20 pm
Location: Newborough

Post by team_little_legs »

braudy, just cruious why not go with eather a hilux converion or a Jack McNamara diff ?

my old man has a McNamara diff and axels in the rear of his truck running 35's and hasent had a problem with it.
Posts: 168
Joined: Fri May 11, 2007 10:51 pm
Location: Toowoomba Queensland

Post by Braudy »

No real reason apart from " why not " . This has been a hotly debated subject for donkeys years. I have nothing against Jack McNamara diffs or the Toyota conversion personally . But if I had to give a black and white answer I think it would be I like the idea of using something standard (ish). What I mean is if I break something out and about the chances of finding / scrounging a replacement is going to be a lot more likely than finding a custom bit. The chances of getting hold of a stock nissan cv or axle is a lot more likely. And repairs would be cheaper , standard stuff isn't that dear.

I realise the initial set up of the conversion will be pricey , but thats the same with anything anyway.

The nissan stuff isn't that dear and provides a little bit of extra width as well.

I like the idea of utilising factory bits no matter what the breed.

Hope that makes some sense to you

Cheers

Braudy
V8 beats gravity

If you cant buy it , Make it !

Bob tail Rangey
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

Do you have a item number for your bits on ebay braudy?
Posts: 34
Joined: Tue Apr 24, 2007 5:17 pm
Location: Redbank Plains

Post by stikman »

qserv wrote:Do you have a item number for your bits on ebay braudy?
http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 0318446506
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

Do you know whats involved in fitting this box up? how far back does the transfercase sit compared to normal? the patrol box's are pretty big compared the rover ones....
Posts: 168
Joined: Fri May 11, 2007 10:51 pm
Location: Toowoomba Queensland

Post by Braudy »

The length of the bell housing adapter ring, patrol box ,adapter and LT230 measures out at 1100mm or 43 1/4 inches or 3 ft 7 and a bit , depending on how old you are. Pretty sure you need a minimum of a 2 inch body lift . This kit came out of a Discovery before I got it.

Cheers

Braudy
V8 beats gravity

If you cant buy it , Make it !

Bob tail Rangey
Posts: 91
Joined: Sat Jan 22, 2005 4:55 pm
Location: Cairns, FNQ.

Post by 1103.9TD »

Would this setup fit a County?, any mod's required?, what's the box out of, a TD42 Poohtrol?.
Cheers, Gerry........


7/87 110 County Isuzu 3.9TDI, Maxi Front n Rear.
Posts: 395
Joined: Thu Nov 06, 2003 4:36 pm
Location: cowtown W.A.

Post by jbell »

LRA use to do this conversion dont know if they still do,
maybe give them a call..


Jeff
rover money pit on mogs !!!
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

It will probobly take some mods to fit a county after looking at mine, it will need the cross members modified pretty heavily, but im planning on bidding and putting it in mine behind the Gen3 :)
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

Well it looks like i will be puting a patrol box in my county...
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

qserv what did you end up paying for the kit??
Posts: 248
Joined: Tue Mar 30, 2004 3:44 pm
Location: Sydney Australia

Post by zuffen »

When I put the Trol box in mine I used the Nissan crossmember and made plates to run up the side of the chassis and used the RR bolt holes.

Easy instal once you've made the adaptor (which is quite easy) you need to shorten drive shafts and lift the body as the handbrake drum eats into the floor.
Cheers,

Zuffen

There's no such a thing as too much horsepower
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

I got it for 950 on ebay, i contacted LRA they have another kit, the last one they have, there asking 2k for it inlcuding a good GQ gearbox,,..

Zuffen did you make your own patrol box to lt230 adapter?
Posts: 1559
Joined: Sun Nov 03, 2002 2:35 pm
Location: Captain Creek QLD

Post by Bush65 »

Mick,
Your 110 may have more room compared to rangie (zuffen has a dakar/bushranger).

Rangies have a cross member built into the floor (for seat and seat belt mounts) that is much closer to the hand brake drum.
John
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

qserv wrote:I got it for 950 on ebay, i contacted LRA they have another kit, the last one they have, there asking 2k for it inlcuding a good GQ gearbox,,..

Zuffen did you make your own patrol box to lt230 adapter?
Mate for what was there with the auction that to me seems like a damn good buy.
If i liked driving manuals then i would have been bidding against you :lol:
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

Yep, im pretty pleased with the buy, just gota get it here now! and yeh im very glad ive found a manual that will do the job, with the gen3 going in it was looking more and more likely i would be running a t700 behind it, I dont mind autos but manuals just a little more fun and easier to deal with if something goes wrong(starter or battery failure etc its been a regular thing for me...)

Hopefully it fits in without to many mods, hardest part will probobly be trying to sort out the transfercase selector
Posts: 248
Joined: Tue Mar 30, 2004 3:44 pm
Location: Sydney Australia

Post by zuffen »

Nah.

Used the Trol transfer and lived with 2WD.

Doesn't seem to affect the handling of my truck so i"ll live with it.

If I drove off road a lot I would do the LT230 adapter.

I adapted the gearbox to my Lexus engine (I know the car is a real bastard) but it required some cutting of the rear floor as the trans brake wanted to live where passenger's feet used to.

Mine shifts better than my LT77 and is twice as strong.

I have no problem using the stongest parts available and to hell with "brand" alleciance.

Go ahead and do it. You'll never be sorry.
Cheers,

Zuffen

There's no such a thing as too much horsepower
Posts: 64
Joined: Wed Oct 19, 2005 12:37 pm
Location: Stockton

Post by qserv »

Sounds interesting, do you have any pics or bulld up thread etc on your truck? i would love to have a look,,.. I thought about using the lexus motor too, but decided on the gen3 as one came up at the right price. Hopefully i can get some reasonable economy out of it too compared to the old carby motors i have been running..
Posts: 1575
Joined: Thu Dec 28, 2006 6:50 pm
Location: Moronfield....

Post by nottie »

I would consider running a few air rams on brackets for the shifters on the LT
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests