Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need spring bush identification. prob 40-70 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

need spring bush identification. prob 40-70 series

Post by brendan_h »

i got sent a sample spring bush for a trac bar i am bullding. i like the bushes and will suit my application.

they have 'mo2153' stamped onto them and are 38mm on the small bit.

so what are they off and does nayone have some old ones they want ot send me? i need 2 sets (4bushes total) and the tube that goes inside the hole :lol:
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

No idea what that number is but if you have the ID, OD, Length and shoulder measurements you should be able to look up the part number for a suitable bush kit here: (14.8mb)

http://www.nolathane.com.au/catalogue/N ... _Ed9.0.pdf
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

part number 47065. coudlnt find any cruiser with that?

dimentions are 38x19ID, 37.5 long 6mm flange
Last edited by brendan_h on Sun Jul 12, 2009 10:58 pm, edited 1 time in total.
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

CJ7, CJ8
1973-85 4cyl
R Spring - eye front 47065

Comes as a set of 4 bushes with 2 crush tubes: 19mm OD, 14.3mm ID and 76mm in length.

The only problem left is having to come to terms with the fact you're using jeep parts. :finger:
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

RAY185 wrote:CJ7, CJ8
1973-85 4cyl
R Spring - eye front 47065

Comes as a set of 4 bushes with 2 crush tubes: 19mm OD, 14.3mm ID and 76mm in length.

The only problem left is having to come to terms with the fact you're using jeep parts. :finger:
my insurace covers fires :lol:
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 1315
Joined: Wed Aug 17, 2005 6:24 pm
Location: Spring Mountain, Greenbank.

Post by brooksy »

brendan_h wrote:
RAY185 wrote:CJ7, CJ8
1973-85 4cyl
R Spring - eye front 47065

Comes as a set of 4 bushes with 2 crush tubes: 19mm OD, 14.3mm ID and 76mm in length.

The only problem left is having to come to terms with the fact you're using jeep parts. :finger:
my insurace covers fires :lol:

NICE !!! :D



brooksy
C44F-Custom 4x4 Fabrications
0400 443 802
brooksy72@live.com.au
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

RAY185 wrote:CJ7, CJ8
1973-85 4cyl
R Spring - eye front 47065

Comes as a set of 4 bushes with 2 crush tubes: 19mm OD, 14.3mm ID and 76mm in length.

The only problem left is having to come to terms with the fact you're using jeep parts. :finger:
do you know where i am able to get some of these bushes online? im not going to have time this week to get down to a spring shop.
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 1094
Joined: Tue Feb 10, 2004 6:58 pm

Post by STIKA »

Brendan, if you can organise them locally I can pick them up for you.
Supported By
Milanco
Phones N Alarms
Buds Customs
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

STIKA wrote:Brendan, if you can organise them locally I can pick them up for you.
im in sydney

edit- i found more park numbers that would suit my application. anyone know what car they are off

45221
47293
47064
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

brendan_h wrote:
STIKA wrote:Brendan, if you can organise them locally I can pick them up for you.
im in sydney

edit- i found more park numbers that would suit my application. anyone know what car they are off

45221
47293
47064
45221: OD 38, ID 19, L 32.5, Flange 7
Crush Tubes: 19 x 14.3 x 64.
Fits: Vitara SE416, SV420, SV620 (Escudo) 1988-on 4/6cyl
Front Crontrol Arm - Lower Inner Rear.
Also Vitara SV620 (Escudo, Levante, Mazda Proceed) 3/96-on 6cyl
Front Control Arm - Lower Inner Rear.
------------------------------------------------------------------------------

47293: OD 38, ID 19, L 33.5, Flange 5.4
Crush Tubes: 19 x 14.5 x 70
Fits:Cherokee XJ 1994-on 6cyl
Rear Spring - Shackle (Fire Extinguisher Not Included)
--------------------------------------------------------------------------------

47064: OD 38, ID 19, L 35.5, Flange 11
Crush Tubes: 19 x 14.5 x 70
Fits: CJ7, CJ8 1973-85 4cyl
Front Spring - Eye Rear (Marshmellows Included)
--------------------------------------------------------------------------------

Don't know of anywhere you can order these online. But any suspension shop/repco/etc should be able to order in what you want. Doubt you'll find any of the CJ Jeep stuff readily but Vitara and Cherokee shouldn't be too hard to get.
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

for future reference. where are you getting this info as to what model car they came off?
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

haha, you'll turkey slap yourself when I tell you!

































If you look up in the Adobe toolbar there is a search box. Chuck the part number in there and hit search, then hit the next button and it will find every reference to the part number in the catalogue. Have fun. :D
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

brendan_h wrote:FOUND THEM

http://www.suzistore.com.au/shopexd.asp?id=1355

$55 :shock:
If you can get trade price at Repco you should be able to get the 45221 kit for about half that.
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

RAY185 wrote:
brendan_h wrote:FOUND THEM

http://www.suzistore.com.au/shopexd.asp?id=1355

$55 :shock:
If you can get trade price at Repco you should be able to get the 45221 kit for about half that.
i cant. im not a machanic. are you able to get trade price? maybe you could get them send them my way. should only cost 10bucks to post
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Resident Terrorist
Posts: 4278
Joined: Fri May 21, 2004 9:37 am
Location: Driving Barnsey's mum to bingo

Post by RAY185 »

In all honestly by the time I buy the bushes and add freight you'll only save about $15. Much better if you can get a local mate who can get trade discount to get them for you locally. Much better again if you make your trac bar ends to suit a more commonly used (cheaper) bush. Do you have to use nolathane?

For example, if you could use a 60/75 series shackle/eye bush, you could get away with buying the bushes in rubber for a couple of dollars each retail. They don't use crush tubes though so you'd have to sort that.
Specs on them are 35mm OD, 18.2 ID, 41 L and 6 Flange.

Otherwise if this is a one off and you can't make that bush size work then just buy the nolathane bushes for the zook and be done with it I reckon.
Posts: 835
Joined: Fri May 05, 2006 4:56 pm
Location: Sydney

Post by brendan_h »

meh. i bough them. hope they work or i will soo pissed off
91 SWB Sierra. 16v 1.6efi, extractors, 6.1gears, SPOA, 32 BF muddys and 2inch bodylift
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests