need spring bush identification. prob 40-70 series

Post by **brendan_h** » Sun Jul 12, 2009 10:08 pm

i got sent a sample spring bush for a trac bar i am bullding. i like the bushes and will suit my application.

they have 'mo2153' stamped onto them and are 38mm on the small bit.

so what are they off and does nayone have some old ones they want ot send me? i need 2 sets (4bushes total) and the tube that goes inside the hole

Post by **RAY185** » Sun Jul 12, 2009 10:22 pm

No idea what that number is but if you have the ID, OD, Length and shoulder measurements you should be able to look up the part number for a suitable bush kit here: (14.8mb)

http://www.nolathane.com.au/catalogue/N ... _Ed9.0.pdf

Post by **brendan_h** » Sun Jul 12, 2009 10:42 pm

part number 47065. coudlnt find any cruiser with that?

dimentions are 38x19ID, 37.5 long 6mm flange

Post by **RAY185** » Sun Jul 12, 2009 10:55 pm

CJ7, CJ8
1973-85 4cyl
R Spring - eye front 47065

Comes as a set of 4 bushes with 2 crush tubes: 19mm OD, 14.3mm ID and 76mm in length.

The only problem left is having to come to terms with the fact you're using jeep parts.

Post by **brendan_h** » Mon Jul 13, 2009 6:17 am

RAY185 wrote:CJ7, CJ8
1973-85 4cyl
R Spring - eye front 47065

Comes as a set of 4 bushes with 2 crush tubes: 19mm OD, 14.3mm ID and 76mm in length.

The only problem left is having to come to terms with the fact you're using jeep parts.

my insurace covers fires

Post by **brooksy** » Mon Jul 13, 2009 8:57 am

brendan_h wrote:
RAY185 wrote:CJ7, CJ8
1973-85 4cyl
R Spring - eye front 47065

Comes as a set of 4 bushes with 2 crush tubes: 19mm OD, 14.3mm ID and 76mm in length.

The only problem left is having to come to terms with the fact you're using jeep parts.
my insurace covers fires

NICE !!!

brooksy

Post by **brendan_h** » Mon Jul 13, 2009 5:00 pm

RAY185 wrote:CJ7, CJ8
1973-85 4cyl
R Spring - eye front 47065

Comes as a set of 4 bushes with 2 crush tubes: 19mm OD, 14.3mm ID and 76mm in length.

The only problem left is having to come to terms with the fact you're using jeep parts.

do you know where i am able to get some of these bushes online? im not going to have time this week to get down to a spring shop.

Post by **STIKA** » Mon Jul 13, 2009 5:03 pm

Brendan, if you can organise them locally I can pick them up for you.

Post by **brendan_h** » Mon Jul 13, 2009 5:07 pm

STIKA wrote:Brendan, if you can organise them locally I can pick them up for you.

im in sydney

edit- i found more park numbers that would suit my application. anyone know what car they are off

45221
47293
47064

Post by **RAY185** » Mon Jul 13, 2009 6:56 pm

brendan_h wrote:
STIKA wrote:Brendan, if you can organise them locally I can pick them up for you.
im in sydney

edit- i found more park numbers that would suit my application. anyone know what car they are off

45221
47293
47064

45221: OD 38, ID 19, L 32.5, Flange 7
Crush Tubes: 19 x 14.3 x 64.
Fits: Vitara SE416, SV420, SV620 (Escudo) 1988-on 4/6cyl
Front Crontrol Arm - Lower Inner Rear.
Also Vitara SV620 (Escudo, Levante, Mazda Proceed) 3/96-on 6cyl
Front Control Arm - Lower Inner Rear.
------------------------------------------------------------------------------

47293: OD 38, ID 19, L 33.5, Flange 5.4
Crush Tubes: 19 x 14.5 x 70
Fits:Cherokee XJ 1994-on 6cyl
Rear Spring - Shackle (Fire Extinguisher Not Included)
--------------------------------------------------------------------------------

47064: OD 38, ID 19, L 35.5, Flange 11
Crush Tubes: 19 x 14.5 x 70
Fits: CJ7, CJ8 1973-85 4cyl
Front Spring - Eye Rear (Marshmellows Included)
--------------------------------------------------------------------------------

Don't know of anywhere you can order these online. But any suspension shop/repco/etc should be able to order in what you want. Doubt you'll find any of the CJ Jeep stuff readily but Vitara and Cherokee shouldn't be too hard to get.

Post by **brendan_h** » Mon Jul 13, 2009 6:58 pm

for future reference. where are you getting this info as to what model car they came off?

Post by **brendan_h** » Mon Jul 13, 2009 7:09 pm

FOUND THEM

http://www.suzistore.com.au/shopexd.asp?id=1355

$55

Post by **RAY185** » Mon Jul 13, 2009 7:13 pm

haha, you'll turkey slap yourself when I tell you!

If you look up in the Adobe toolbar there is a search box. Chuck the part number in there and hit search, then hit the next button and it will find every reference to the part number in the catalogue. Have fun.

Post by **RAY185** » Mon Jul 13, 2009 7:16 pm

brendan_h wrote:FOUND THEM

http://www.suzistore.com.au/shopexd.asp?id=1355

$55

If you can get trade price at Repco you should be able to get the 45221 kit for about half that.

Post by **brendan_h** » Mon Jul 13, 2009 7:55 pm

RAY185 wrote:
brendan_h wrote:FOUND THEM

http://www.suzistore.com.au/shopexd.asp?id=1355

$55
If you can get trade price at Repco you should be able to get the 45221 kit for about half that.

i cant. im not a machanic. are you able to get trade price? maybe you could get them send them my way. should only cost 10bucks to post

Post by **RAY185** » Tue Jul 14, 2009 2:32 pm

In all honestly by the time I buy the bushes and add freight you'll only save about $15. Much better if you can get a local mate who can get trade discount to get them for you locally. Much better again if you make your trac bar ends to suit a more commonly used (cheaper) bush. Do you have to use nolathane?

For example, if you could use a 60/75 series shackle/eye bush, you could get away with buying the bushes in rubber for a couple of dollars each retail. They don't use crush tubes though so you'd have to sort that.
Specs on them are 35mm OD, 18.2 ID, 41 L and 6 Flange.

Otherwise if this is a one off and you can't make that bush size work then just buy the nolathane bushes for the zook and be done with it I reckon.

Post by **brendan_h** » Tue Jul 14, 2009 7:59 pm

meh. i bough them. hope they work or i will soo pissed off

Outer Limits 4x4 Board

need spring bush identification. prob 40-70 series

need spring bush identification. prob 40-70 series

Who is online