Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

e lockers

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 20
Joined: Wed Oct 15, 2008 7:51 am
Location: gold coast

e lockers

Post by MR SHIMANO »

got a 75 series cruiser ute and thinking about putting e lockers in the front and rear. has anyone used or got any info on how these go and there reliability. any 2 cents worth of info would be great.
cheers pete.
Top
Posts: 360
Joined: Fri Nov 11, 2005 11:54 pm
Location: Shellharbour

Post by BUSTED100 »

they're reliable, just a little slower to engage but the diff housings, long axles are all different to standard non e-locker stuff
*T/D 80 Saharra - SOLD *V8 100 GXL - SOLD
* 105 - CHOPPED, LOCKED & ROLLED see build up http://www.outerlimits4x4.com/viewtopic.php?f=16&t=167093&hilit=busted100
Top
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Post by RED60 »

BUSTED100 wrote:they're reliable, just a little slower to engage but the diff housings, long axles are all different to standard non e-locker stuff
And 1 or 2 of the bearings in the centre are different... :cool:
Show me the money..SHOW ME THE MONEY
Top
Posts: 20
Joined: Wed Oct 15, 2008 7:51 am
Location: gold coast

Post by MR SHIMANO »

thanx for the info guys. im leaning towards these lockers as i think electrics are easier to fix than busted air lines out in the bush.
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

Also the factory wiring is fairly complex so not sure how much rooting around is required to ge them to work properly if you do not have all the wiring and ecu stuff.
Top
Posts: 20
Joined: Wed Oct 15, 2008 7:51 am
Location: gold coast

Post by MR SHIMANO »

if i get them installed from a 4x4 shop, do they supply all wiring and everything that is needed to have it runnin. i got a price today of around 1650. is this price ok
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

Are you talking the factory electric lockers or the Eaton e-locker.
Top
Posts: 20
Joined: Wed Oct 15, 2008 7:51 am
Location: gold coast

Post by MR SHIMANO »

sorry am talkin about the eaton lockers
Top
Posts: 550
Joined: Tue Mar 04, 2008 7:40 pm
Location: Gympie Qld

Post by fester2au »

Ah Ok different storyu then. Obviously with an aftermarket kit ou will get the whole thing fully set up. Don't know enough about them but the price is right. That probably about half an ARB instal if you need the compressor as well.
Top
Posts: 53
Joined: Sat Jun 13, 2009 10:14 am
Location: aust

Post by dat383 »

Where are you going to get parts for an eaton when it breaks?

They are not manufactured in australia.
Top
Posts: 535
Joined: Wed Nov 10, 2004 10:42 am
Location: QLD

Post by Drift Technician »

If you get them you better start taking some harder lines princess...........

:finger: :finger: :finger: :finger: :finger: :finger: :finger:
If its not upside down and on fire, I'm not trying hard enough.......

My Build: [url]http://www.outerlimits4x4.com/phpBB2/ftopic177269.php[/url]
Top
Posts: 185
Joined: Mon May 05, 2008 3:54 pm
Location: Canberra, ACT, Australia

Post by SimonInAustralia »

dat383 wrote:Where are you going to get parts for an eaton when it breaks?

They are not manufactured in australia.
Sorry, but that is not correct.

They are manufactured for local models in Australia, by Harrop Engineering in Melbourne, under licence/in conjunction with Eaton in the US.
Top
Posts: 185
Joined: Mon May 05, 2008 3:54 pm
Location: Canberra, ACT, Australia

Post by SimonInAustralia »

MR SHIMANO wrote:if i get them installed from a 4x4 shop, do they supply all wiring and everything that is needed to have it runnin. i got a price today of around 1650. is this price ok
The kit comes with the wiring loom, relay, switch, etc., everything you need to install it.

Once they have the axles out though, you might want to look at the condition of the axle/swivel-hub/diff bearings and replace any that need it.
Top
Posts: 82
Joined: Thu Oct 30, 2008 7:34 pm
Location: caloundra

Post by Glux »

where is the best place to get them from and what price are they?
Top
Posts: 31
Joined: Thu Jul 07, 2005 7:39 pm
Location: brissy

Post by 110county »

Harrop engineering (vic) sell them, I don't know where else you would get them, they will freight anywhere. I got an email quote about 2 months ago and from memory it was about $1600 per locker complete (front or rear for 80s). I will be getting one as soon as funds permit, got to be better than an airleaker.
95 factory turbo diesel 80 series

A member of the 1HDFT fan club
Top
Posts: 535
Joined: Wed Nov 10, 2004 10:42 am
Location: QLD

Post by Drift Technician »

Believe he is getting it supplied and installed by Opposite Lock at Nerang on the Gold Coast.
If its not upside down and on fire, I'm not trying hard enough.......

My Build: [url]http://www.outerlimits4x4.com/phpBB2/ftopic177269.php[/url]
Top
Posts: 20
Joined: Wed Oct 15, 2008 7:51 am
Location: gold coast

Post by MR SHIMANO »

it is being installed by tony at opposite lock. ph. 07 55964886
Top
Posts: 151
Joined: Thu Oct 23, 2008 10:19 pm
Location: Newcastle

Post by IN24BZ »

40,000 kms on my leakers and still no dramas =] fingers crossed
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)

What torque? Tighten it till it strips and then back it off half a turn.
Top
Posts: 745
Joined: Sat Aug 02, 2008 9:45 am
Location: Vanuatu/ QLD

Post by thrashlux »

MR SHIMANO wrote:thanx for the info guys. im leaning towards these lockers as i think electrics are easier to fix than busted air lines out in the bush.
I would have said the opposite

i just carry a small length of airline and a quick push in joiner (tony powel hose suplies) can fix any busted line in less than 1 min
airlines are not affected by water , salt and mud

i dont think electrics should be under a truck in the mud and salt water
as any connections will give trouble over time if the truck is used in these conditions pneumatics suffer no such fate

i am an electrican by trade and know the problems of electrics and the environment
the process control industry uses pneumatics for a reason (reliability and simplicity )

i have had 3 trucks all with air lockers never had problems with them engaging
other than once when the fuse holder for the electrics was corroded and it was high and dry not down with the dirty stuff
i have found the pneumatics to be the most reliable part of the set up
80 series 1980 hilux cab supra twin turbo engine
1hdfte 80 series
LHD fz 80 series GX
Top
Posts: 149
Joined: Thu Dec 01, 2005 8:43 pm
Location: Launceston, Tasmania

Post by cookiesa »

fester2au wrote:Ah Ok different storyu then. Obviously with an aftermarket kit ou will get the whole thing fully set up. Don't know enough about them but the price is right. That probably about half an ARB instal if you need the compressor as well.
That's per locker.. so about the same as an air locker
94 Disco Tdi
Bar with Winch
Full Mesh Alloy Rack
Awning
2" Lift
Coolant Alarm, UHF
Dual Batteries
Snorkel
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests