Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Gearmaster reduction gears?
Gearmaster reduction gears?
Anyone had any Experience with the Gear master gears that Marks 4wd sell??
Mooney Yee Haa
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
Go Off like a Frog in a SOCK!
I didnt do it! - Bart
i rang them the other day and the guy there said that they only want to sell them to the guys with comp truck as they are to noisy to drive on the road.
I just bought a set of trail tough gears from the states, rock monsters, they cost me $1040 landed on my doorstep. all bearings and gaskets included.
I just bought a set of trail tough gears from the states, rock monsters, they cost me $1040 landed on my doorstep. all bearings and gaskets included.
www.goldcoast4wd.com.au for all your Mods accecories, and custom barwork
I have heard this too. (Too noisy to use on the road) I guess they just screwed the design up.
If they were very, very cheap I'd give them a run, but considering the price of known good gears from the US, why bother?
PS my 6.5 trail tough gears make no identifiable gear noise.
Steve.
If they were very, very cheap I'd give them a run, but considering the price of known good gears from the US, why bother?
PS my 6.5 trail tough gears make no identifiable gear noise.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
How would you compare them to a standard case Steve?Gwagensteve wrote:PS my 6.5 trail tough gears make no identifiable gear noise.
My TG 6.5s have a bit of a gear noise as such, and have done ever since I had a gearbox shop set the case up with new bearings etc throughout.
I've since had a standard case back in the same car (sold it) and noticed the standard case to be quieter.
What I always assumed was just the whine of the extra reduction, may mean that the gears weren't shimmed correctly on install create a bit more whine? I'd be confident in the health of the bearings as they've always had good oil, and it's always looked fresh. Not loud to the point of being concerning, but loud enough to notice.
No noise at the moment though, the case is sitting in the garage without a car to go in
-Mal
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
Zook 1, 2, 3 gone
Patrol - Wheels, engine and stuff
I heard they are really noisy.
I've had some noisy transfers and you'll want to slit your wrists after a normal day drive. Really, you will.
They'd need to be super cheap... like free... or something. Bear in mind too, if they're noisy in high range they'll be just as noisy in low range- and you'll notice more because there's no road/wind noise.
Just my 2c. I didn't even think they were than cheap.
Steve.
I've had some noisy transfers and you'll want to slit your wrists after a normal day drive. Really, you will.
They'd need to be super cheap... like free... or something. Bear in mind too, if they're noisy in high range they'll be just as noisy in low range- and you'll notice more because there's no road/wind noise.
Just my 2c. I didn't even think they were than cheap.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 0 guests