Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Castor correction wedges

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

Castor correction wedges

Post by DR Frankenstine »

Where will I buy castor wedges for my hilux leaf springs.
Remember some days your the pigeon and other days your the statue
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Any EFS distributor, Superior Engineering, any 4wd shop should have or be able to get them.
Top
Posts: 658
Joined: Wed Feb 13, 2008 5:41 pm
Location: Brissy

Post by yamaha__308 »

I tried a few reputable spring works in brissy and they were no help. Superior has them for 70-80 bucks a pair though.

Can you get around the problem?
Top
Posts: 107
Joined: Tue Sep 09, 2008 10:14 pm
Location: THE SHIRE:BIRTH PLACE OF MODERN AUSTRALIA

Post by AUSDOG »

http://72.34.32.141/~snakerac/product_i ... 03cee5f58c
Top
Posts: 4330
Joined: Tue Jun 08, 2004 6:06 pm
Location: Central Victoria

Contact:
Contact coxy321

Post by coxy321 »

I got Superior plates for my MK when i had it. Worked a treat.
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

$70-$80 is about the going rate, cheaper than offset king pin bearings though.
Top
Posts: 413
Joined: Sun May 29, 2005 11:35 pm
Location: Launceston, Tas

Post by Sixty's Guy »

I bought some from a local steering shop. $20 for a pair of 3 degree.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

He must have been feeling generous because the cost price is more than that! :cool:
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

people with castor wedges of around 5deg should get longer spring center pins too, the pins has to enter the main leaf to lock in place, with wedges it only goes in like 2mm.
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

Z()LTAN wrote:people with castor wedges of around 5deg should get longer spring center pins too, the pins has to enter the main leaf to lock in place, with wedges it only goes in like 2mm.
The spring wedges I got for my Lux from Snake racing have the centre bolt bolted through the wedge.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 28
Joined: Tue Feb 11, 2003 5:42 pm

Post by Ashy »

On the subject of caster wedges, I have a 06 Hilux with Ironman rear leaves which raises the rear about 3 inches, should I put wedges in? If so what degree?

Ashy.
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

Post by DR Frankenstine »

Ashy wrote:On the subject of caster wedges, I have a 06 Hilux with Ironman rear leaves which raises the rear about 3 inches, should I put wedges in? If so what degree?

Ashy.
No there's no need. Wedges are to correct castor for your steering geometry
Remember some days your the pigeon and other days your the statue
Top
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

spicer springs in bayswater vic $ 18 each
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Top
Posts: 54
Joined: Mon Jan 30, 2006 6:33 pm
Location: blue haven

Post by grubb »

bbm have them as well
Top
Posts: 658
Joined: Wed Feb 13, 2008 5:41 pm
Location: Brissy

Post by yamaha__308 »

DR Frankenstine wrote:
Ashy wrote:On the subject of caster wedges, I have a 06 Hilux with Ironman rear leaves which raises the rear about 3 inches, should I put wedges in? If so what degree?

Ashy.
No there's no need. Wedges are to correct castor for your steering geometry
Not only steering geometry, but also large driveshaft angles which may cause vibrations. But in the rear its probably easier to cut and rotate perches.
Top
Posts: 2585
Joined: Fri Mar 28, 2008 4:45 pm
Location: SYDNEY

Post by thehanko »

yamaha__308 wrote:
DR Frankenstine wrote:
Ashy wrote:On the subject of caster wedges, I have a 06 Hilux with Ironman rear leaves which raises the rear about 3 inches, should I put wedges in? If so what degree?

Ashy.
No there's no need. Wedges are to correct castor for your steering geometry
Not only steering geometry, but also large driveshaft angles which may cause vibrations. But in the rear its probably easier to cut and rotate perches.
surely thats not easier than spending $40 and 1/2 an hour to fit.
*there's a rock, drive over it :) there's a bigger rock, drive over it :twisted: there's an even bigger rock, oops broke it :oops: Upgrade broken bit :bad-words:
Goto *
Top
Posts: 1090
Joined: Mon Jun 02, 2003 6:58 pm
Location: Hobart

Contact:
Contact DR Frankenstine

wedges

Post by DR Frankenstine »

the thing with driveshaft angles is you cant /shouldn't have any more than 5 deg difference between the top and bottom uni's. So if the tailshaft is pointing down at say 15 deg and you point the pinion up to lessen the angle of the uni at the pinion you may get viabration
Remember some days your the pigeon and other days your the statue
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 115 guests