Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Quick gq to gu hub nut conversion question

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 28
Joined: Sun Feb 17, 2008 8:32 pm
Location: Melbourne, Victoria

Quick gq to gu hub nut conversion question

Post by woodys72 »

hey guys just got a quick question regarding the gq to gu hub nut conversion..
I got a kit off Hobzee and it came with the locking nut, locking washer and some screws. But it also came with a 3-4mm thick plate with a locating tab on it. Can anyone tell me what this is for?

I am also assuming that you do up the locking nut first, then after it has been torqued correctly you slide on the locking washer and screw it down to the nut to secure it?
Top
Posts: 21
Joined: Sun Jun 19, 2005 9:00 pm
Location: vic

Post by MUDDY MONTY »

that is right
Top
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Contact:
Contact jessie928

Re: Quick gq to gu hub nut conversion question

Post by jessie928 »

woodys72 wrote: I am also assuming that you do up the locking nut first, then after it has been torqued correctly you slide on the locking washer and screw it down to the nut to secure it?
yes, that is correct.
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Top
User avatar
sw1
Posts: 297
Joined: Mon Mar 15, 2004 10:06 am
Location: around the place

Post by sw1 »

this may help

Image
2003 GU Patrol ST 4.2L Diesel Turbo Intercooled
1988 D21 Pathfinder 3.8L V6 & T700 - SOLD 11/12
Top
Posts: 28
Joined: Sun Feb 17, 2008 8:32 pm
Location: Melbourne, Victoria

Post by woodys72 »

Thanks for the replies guys!

Still no idea what that other thick washer is meant to be for.. any ideas?
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

the thick washer should be the bearing backing washer, stops the bearing cone turning against the locking nut. You should already have that washer inside your assembly.
Top
Posts: 28
Joined: Sun Feb 17, 2008 8:32 pm
Location: Melbourne, Victoria

Post by woodys72 »

nastytroll wrote:the thick washer should be the bearing backing washer, stops the bearing cone turning against the locking nut. You should already have that washer inside your assembly.
ahhh.. thought it looked familiar! thanks dude.

so the thick washer would sit against the bearing, then the locking nut goes on, then the locking washer.. correct? sorry guys, pulled the car apart about 4 weeks ago, so just got a little lost
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 0 guests