Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TB42e camshaft
TB42e camshaft
Can I replace the camshaft in my TB42 without pulling the engine out? Can I also do it without pulling the head off?
Nissan GQ Patrol '89
TB45 ~ LPG ~ 33' bighorns
TB45 ~ LPG ~ 33' bighorns
with the amount of work that is involved any way you should probably just pull of the head. and that way you can inspect the valves to see if there leakin compression and just have a good look over the whole lot. you don't want to put the new cam in and find out when you go to tune it that i needs to come off anyway for work.
DUAL CAB STYLE SIDE GQ.
Well I stripped mine down and found the lifters wont fit through the pushrod hole so you must remove the head. The sump needs to be unbolted at the front too.
I'm having trouble finding gaskets also. I cant get a water pump gasket or a front engine cover gasket. I can only get a engine overhaul kit for $335.
I think its all too much work and I shouldn't have started the job in the first place!
I'm having trouble finding gaskets also. I cant get a water pump gasket or a front engine cover gasket. I can only get a engine overhaul kit for $335.
I think its all too much work and I shouldn't have started the job in the first place!
Nissan GQ Patrol '89
TB45 ~ LPG ~ 33' bighorns
TB45 ~ LPG ~ 33' bighorns
A speed camera would have prevented that!
I sense that you will be purchasing 8 spark plugs from now on.create wrote:Well I stripped mine down and found the lifters wont fit through the pushrod hole so you must remove the head. The sump needs to be unbolted at the front too.
I'm having trouble finding gaskets also. I cant get a water pump gasket or a front engine cover gasket. I can only get a engine overhaul kit for $335.
I think its all too much work and I shouldn't have started the job in the first place!
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Who is online
Users browsing this forum: No registered users and 0 guests