Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TB42e camshaft

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 158
Joined: Thu Jul 10, 2008 1:19 pm
Location: Southern Tablelands

TB42e camshaft

Post by create »

Can I replace the camshaft in my TB42 without pulling the engine out? Can I also do it without pulling the head off?
Nissan GQ Patrol '89
TB45 ~ LPG ~ 33' bighorns
Top
Posts: 103
Joined: Thu Feb 07, 2008 1:43 pm
Location: MELBOURNE

Post by ANDREWGQ 351 »

Yes to while engine is in, just remove the aircon evaporator from the mounts to allow enough length, if you can get the lifters up through the head then it can stay on
Top
Posts: 130
Joined: Wed Jan 05, 2005 3:58 pm
Location: Gold coast

Post by Quadcamshorty »

Are the lifters normally a prick to get up through the head?
GQ shorty, turbo tb42, motec, 35 mt claws, cheezy bar, highmount, 3inch spring, 2inch body

Need an interstate courier? http://www.transdirect.com.au
Top
Posts: 158
Joined: Thu Jul 10, 2008 1:19 pm
Location: Southern Tablelands

Post by create »

Quadcamshorty wrote:Are the lifters normally a prick to get up through the head?
What should I use to pick them up with? Do they actually fit through the head?
Nissan GQ Patrol '89
TB45 ~ LPG ~ 33' bighorns
Top
Posts: 29
Joined: Sat Jul 21, 2007 4:10 pm
Location: brisbane

Post by kebwaa »

with the amount of work that is involved any way you should probably just pull of the head. and that way you can inspect the valves to see if there leakin compression and just have a good look over the whole lot. you don't want to put the new cam in and find out when you go to tune it that i needs to come off anyway for work.
DUAL CAB STYLE SIDE GQ.
Top
Posts: 158
Joined: Thu Jul 10, 2008 1:19 pm
Location: Southern Tablelands

Post by create »

Well I stripped mine down and found the lifters wont fit through the pushrod hole so you must remove the head. The sump needs to be unbolted at the front too.
I'm having trouble finding gaskets also. I cant get a water pump gasket or a front engine cover gasket. I can only get a engine overhaul kit for $335.

I think its all too much work and I shouldn't have started the job in the first place!
Nissan GQ Patrol '89
TB45 ~ LPG ~ 33' bighorns
Top
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

create wrote:Well I stripped mine down and found the lifters wont fit through the pushrod hole so you must remove the head. The sump needs to be unbolted at the front too.
I'm having trouble finding gaskets also. I cant get a water pump gasket or a front engine cover gasket. I can only get a engine overhaul kit for $335.

I think its all too much work and I shouldn't have started the job in the first place!
I sense that you will be purchasing 8 spark plugs from now on.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Top
Posts: 29
Joined: Sat Jul 21, 2007 4:10 pm
Location: brisbane

Post by kebwaa »

make your own gaskets bud, there pretty easy with some gasket paper and a small pall pein hammer. Will save you abit of money too.
DUAL CAB STYLE SIDE GQ.
Top
Posts: 130
Joined: Wed Jan 05, 2005 3:58 pm
Location: Gold coast

Post by Quadcamshorty »

High temp Ultra copper gasket goo will solve both those issues.
GQ shorty, turbo tb42, motec, 35 mt claws, cheezy bar, highmount, 3inch spring, 2inch body

Need an interstate courier? http://www.transdirect.com.au
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 27 guests