Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gq brake upgrade? wat to use

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 26
Joined: Wed Sep 20, 2006 8:36 pm
Location: picton nsw

gq brake upgrade? wat to use

Post by mudrunna »

have 93 td42 lwb patrol, with all the gear, want to update the brakes.?? any suggestions?
:D
Posts: 1644
Joined: Thu Aug 03, 2006 9:50 pm
Location: Hawkesbury, Sydney

Post by CWBYUP »

Other than tow an anchor or rob a bank no.

Good 4x4 pads and slotted rotors.

Other wise GU 4.8L stuff.

Nick
[quote="Vulcanised"]more grunt than a row of drunk girls at a B&S ball!
[/quote]
Posts: 93
Joined: Mon May 18, 2009 9:44 pm
Location: mornington

Post by kane077 »

Chase up the 4.2l efi ti front rotors and calipers. They are twin piston and thicker rotors. They should bolt straight in. Braided flexible lines can improve pedal feel and stopping performance.
Peninsular Diesel Repairs
59 788 400
Posts: 59
Joined: Wed May 07, 2008 2:58 pm
Location: Melbourne

Post by Look'n 4 Mud »

I run Snake racing Braided brake lines to all 4 corners and down to both diffs.. Gold mate, Gold. no doubt.

I have also upgraded my rotors to slotted jobs that i sourced off the internet and they are great :D

I am turning 35's and have not much trouble pulling up. I would highly recommend this setup.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Whats your budget.
there was a thread here from assassin offroad ages ago for some massive discs and calipers all round.. cost was round $6000 from memory, was round 2-3yrs ago
Posts: 36
Joined: Sun Apr 23, 2006 8:20 pm
Location: Brisbane, Queensland

Post by Maverick93 »

Since both have been suggested for a GQ TD42, what's the differance between GQ 4.2EFI brakes and GU 4.8EFI brakes?
1992 Nissan Patrol GQ LWB TD42
Posts: 50
Joined: Sat Sep 01, 2007 11:14 am
Location: gladstone

Post by ratbagpatrol »

year please do tell i would like to know
Nissan patrol swb style side ute comp truck 3.5"costom lift, 2"body lift, 35" maxxis creepy, microtec injection, 24v moded hi mount with all the goodies, thanks Dowie from Lister Motors
Posts: 50
Joined: Sat Sep 01, 2007 11:14 am
Location: gladstone

Post by ratbagpatrol »

year please do tell i would like to know
Nissan patrol swb style side ute comp truck 3.5"costom lift, 2"body lift, 35" maxxis creepy, microtec injection, 24v moded hi mount with all the goodies, thanks Dowie from Lister Motors
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Maverick93 wrote:Since both have been suggested for a GQ TD42, what's the differance between GQ 4.2EFI brakes and GU 4.8EFI brakes?
From an old patrol forum thread

Physical size and different calipers. You would somehow need to mount the calipers which wont bolt up to the stock GQ mount positions, then run 17inch rims.
Posts: 792
Joined: Wed Feb 16, 2005 7:20 pm
Location: Acting the goat.

Post by BowTieGQ »

The 4.8's have a one off size. Biggest of all Patrols. Not sure but would assume that the would bolt on to any Patrol diff. Doubt that the mounts would have changed. But you must run 16" rims to fit them.
[quote="bazooked"]can i use a mate to position while i screw? :twisted:[/quote]
Posts: 253
Joined: Thu Oct 19, 2006 8:03 pm
Location: Melb

Post by ORSM4B »

bogged wrote:Whats your budget.
there was a thread here from assassin offroad ages ago for some massive discs and calipers all round.. cost was round $6000 from memory, was round 2-3yrs ago

Geez where they racing around Bathurst in the Patrol to warrent paying $6000 for brakes, it's a 4X4 for Farkkes sake.......some people obviously have to much cash to throw away....
Posts: 26
Joined: Wed Sep 20, 2006 8:36 pm
Location: picton nsw

thanx

Post by mudrunna »

than x for the suggestions...let you kno how i go..
Posts: 12
Joined: Wed Sep 23, 2009 12:52 pm
Location: syd

Re:

Post by exquisit »

bogged wrote:
Maverick93 wrote:Since both have been suggested for a GQ TD42, what's the differance between GQ 4.2EFI brakes and GU 4.8EFI brakes?
From an old patrol forum thread

Physical size and different calipers. You would somehow need to mount the calipers which wont bolt up to the stock GQ mount positions, then run 17inch rims.
do the non 4.8L twin spot calipers bolt up to a gq?
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Re:

Post by turps »

ORSM4B wrote:
bogged wrote:Whats your budget.
there was a thread here from assassin offroad ages ago for some massive discs and calipers all round.. cost was round $6000 from memory, was round 2-3yrs ago

Geez where they racing around Bathurst in the Patrol to warrent paying $6000 for brakes, it's a 4X4 for Farkkes sake.......some people obviously have to much cash to throw away....
all depends on how fast you go and how many times you want to stop.
As a 89GQ on 35s with fresh pads and slotted disks. It dosent take many application and the brakes are cooked. I would say my fix of fitting a GU front with twin pot calipers and larger disks will be fine for me.
But anyone that races such events as the OBC and Cliffhanger would over heat there brakes to the point of the car not stopping easily on the longer Nav stages. It would be worthwhile.
Also there not for everyone. But when these guys have an easy 90grand in there cars. Whats $6000 to make it stop.

Plus there shiny and everyone loves shiny things.
THOUGHT FOR THE DAY....
Post Reply

Who is online

Users browsing this forum: No registered users and 100 guests