i have searched he bible
my mate wants to fit a 2inch body lift to his 2001 duel cab hilux.
was wondering what will need to be extended and removed.
thanks guys
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Body Lift(have searched)
Moderators: toaddog, Elmo, DUDELUX
you need to undo all the body to chassis mounts should be between 8 and 12 of them. You need 50mm body lift blocks (you can buy them pretty cheap off ebay) and longer bolts. You use a high lift jack, or regualr jack with a block of wood on it to lift one side up till you can fit the blocks in. Then do the same on the other side. put in longer bolts and tighten. Voila!
Note: Things like brake lines/fuel lines/fuel fillers/bullbars/radiator hoses and even steering shafts etc. can all be affected by a body lift and you need to check that there is at least 50mm of free upward travel prior to doing the lift
Note: Things like brake lines/fuel lines/fuel fillers/bullbars/radiator hoses and even steering shafts etc. can all be affected by a body lift and you need to check that there is at least 50mm of free upward travel prior to doing the lift
^^^^^^^^ what he said plus,
make sure you use hitensile bolts for strength, do one bolt/ block at a time, most steering and clutch lines can be stretched a bit(i know the ones in early luxes are wound in circles so just unwinding a bit will give enough clearance). get extended brake lines made or buy a kit, when finished fitting all bolts/ blocks, check to make sure your fuel filler hose is long enough, your radiator fan shroud isnt hitting the radiator fan, and that you can get the gearstick into all gears without any probs.
when i did my 2inBL, i couldnt get into reverse so out with the grinder, did a little trimming and good to go,
take your time and check everything while your raising.
good luck
make sure you use hitensile bolts for strength, do one bolt/ block at a time, most steering and clutch lines can be stretched a bit(i know the ones in early luxes are wound in circles so just unwinding a bit will give enough clearance). get extended brake lines made or buy a kit, when finished fitting all bolts/ blocks, check to make sure your fuel filler hose is long enough, your radiator fan shroud isnt hitting the radiator fan, and that you can get the gearstick into all gears without any probs.
when i did my 2inBL, i couldnt get into reverse so out with the grinder, did a little trimming and good to go,
take your time and check everything while your raising.
good luck
MrsForby wrote: Oh I desperately truly love the taco.
Who is online
Users browsing this forum: No registered users and 28 guests