Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Thermo fans? Ebay special or big brand name?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Thermo fans? Ebay special or big brand name?
I need a thermo fan for my rear mount Radiator setup I am building into my Lux.
Should I go with a big brand name like Davies-craig for around $200 or will a cheapie from Ebay do the same job?
There are stacks of fans on fleabay for around $40-50
is it a case of you get what you paid for or are the cheapies OK?
I would love a twin thermo setup like the Falcons have but they wont fit up to squarer shape of the Lux rad that I am planning on using easilly.
Cheers Paul.
Should I go with a big brand name like Davies-craig for around $200 or will a cheapie from Ebay do the same job?
There are stacks of fans on fleabay for around $40-50
is it a case of you get what you paid for or are the cheapies OK?
I would love a twin thermo setup like the Falcons have but they wont fit up to squarer shape of the Lux rad that I am planning on using easilly.
Cheers Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
How big is a hilux radiator compared to an 80 series one? My VY Ls1 radiator is exactly the same size as my radiator. Most modern cars have thermo's you could have a look at what sizes they have close to the hiluxs radiator at the wreckers.
More Suzuki parts going to the big Suzuki Heaven in the sky!
Re: Thermo fans? Ebay special or big brand name?
fairly sure he said the Falcon ones wont fit up...ausyota wrote:I would love a twin thermo setup like the Falcons have but they wont fit up to squarer shape of the Lux rad that I am planning on using easilly..
or did I read it wrong?
Go for second hand OEM or even source the OEM stuff new.
Seen flea bay ones give up the ghost and a mate had a brand name aftermarket jobby let go and hole his radiator in a remote location.
Nothing wrong with the fitting of the fan either, defect in the fan itself.
Seen flea bay ones give up the ghost and a mate had a brand name aftermarket jobby let go and hole his radiator in a remote location.
Nothing wrong with the fitting of the fan either, defect in the fan itself.
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Re: Thermo fans? Ebay special or big brand name?
a ford or holden factory fitted twin fan system with integrated shroud is your best bet, you may beable to get something that is narrower.ausyota wrote:I need a thermo fan for my rear mount Radiator setup I am building into my Lux.
Should I go with a big brand name like Davies-craig for around $200 or will a cheapie from Ebay do the same job?
There are stacks of fans on fleabay for around $40-50
is it a case of you get what you paid for or are the cheapies OK?
I would love a twin thermo setup like the Falcons have but they wont fit up to squarer shape of the Lux rad that I am planning on using easilly.
Cheers Paul.
a single or double aftermarket fan fitted directly to the fins is not as efficient because it does not drag air through the entire radiator, BUT, you can make a shroud and mount the fan to it, that would work. I woudl then use davis craig or OEM fans of the same type not cheap crap.
JEs
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
DUCATI <-----Worlds best warning label
You definitely want a shroud for a rear mount rad, yeah. Single or double, it's basically a question of the biggest fan you can fit. But if you have a squarish sort of radiator then one big fan is almost certainly going to do the better job.
How are you planning to control it?
How are you planning to control it?
This is not legal advice.
Just a toggle switchchimpboy wrote:You definitely want a shroud for a rear mount rad, yeah. Single or double, it's basically a question of the biggest fan you can fit. But if you have a squarish sort of radiator then one big fan is almost certainly going to do the better job.
How are you planning to control it?
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
Ford and holden spend bucket loads of R&D money on systems. If your going for a custom set up already then why not use a complete falcon or commo radiator, fan and shrowd set up in the rear? You will then know the system will work as well as being easily replaceable.
Warn - Dont leave home without it
I object to that! For twenty bucks you can control it much better and it will last longer too. You don't need a pricey adjustable temperature switch, just get a fixed-temp switch to suit your running temp eg: http://www.outerlimits4x4.com/ftopic147839.phpausyota wrote:Just a toggle switchchimpboy wrote:You definitely want a shroud for a rear mount rad, yeah. Single or double, it's basically a question of the biggest fan you can fit. But if you have a squarish sort of radiator then one big fan is almost certainly going to do the better job.
How are you planning to control it?
They are not expensive. You could get a two-speed one as well, I pinched a big resistor from some euro car (I think it was an Audi) at a pick-a-part to run my 16" fan at half speed when the a/c is on or when the fan is needed but it's not THAT hot yet. It's not just for wank factor, it is safer, the fan lasts longer, and you don't have to watch your temp gauge all the time. And, half speed is much much quieter.
I agree with this if you can physically fit one of them. Not just ford or holden either but anything with a 100% electric cooling system (ie no mechanical fan) and a reasonably powerful engine would do. If you're lucky you might find a complete setup that already has the right hose sizes etc. For some reason (maybe my imagination) some of the euro cars have really grunty electric fans.TRobbo wrote:Ford and holden spend bucket loads of R&D money on systems. If your going for a custom set up already then why not use a complete falcon or commo radiator, fan and shrowd set up in the rear? You will then know the system will work as well as being easily replaceable.
This is not legal advice.
Spal fans.
They're not cheap but they work. My mate Darren at Trikfab modifies the ones below for some very powerful V8 cars. He fits the largest fan motors they build and skewed blades.
The beauty of these ones is in the shroud which incorporate rubber flaps that open with the air pressure of the car as it moves forward and then close when the fans come on making sure all the air is directed through rather than around the radiator and fans.
Regards Andrew.
They're not cheap but they work. My mate Darren at Trikfab modifies the ones below for some very powerful V8 cars. He fits the largest fan motors they build and skewed blades.
The beauty of these ones is in the shroud which incorporate rubber flaps that open with the air pressure of the car as it moves forward and then close when the fans come on making sure all the air is directed through rather than around the radiator and fans.
Regards Andrew.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Does anyone have the measurements of the Falcon twin thermo setup?
I know idealy it would be best to have the falcon radiator with the thermos but I really want the radiator to have a cap on it to help with filling it in the rear and so I dont have to d1ck around with pressurised overflow bottles.
Plus I have a brand new Hilux rad that came with my motor.
If the Falcon thermos come close to fitting I will just adapt them and run that.
Coventrys have brand new genuine falcon twin thermos on sale for $190+gst (I think from memory) this month.
I know idealy it would be best to have the falcon radiator with the thermos but I really want the radiator to have a cap on it to help with filling it in the rear and so I dont have to d1ck around with pressurised overflow bottles.
Plus I have a brand new Hilux rad that came with my motor.
If the Falcon thermos come close to fitting I will just adapt them and run that.
Coventrys have brand new genuine falcon twin thermos on sale for $190+gst (I think from memory) this month.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
www.teamcarnage.net
not sure but they are a perfect fit on MQ patrol radiatorsausyota wrote:Does anyone have the measurements of the Falcon twin thermo setup?
I know idealy it would be best to have the falcon radiator with the thermos but I really want the radiator to have a cap on it to help with filling it in the rear and so I dont have to d1ck around with pressurised overflow bottles.
Plus I have a brand new Hilux rad that came with my motor.
If the Falcon thermos come close to fitting I will just adapt them and run that.
Coventrys have brand new genuine falcon twin thermos on sale for $190+gst (I think from memory) this month.
As mentioned, Spal is a great brand, Davies Craig i have never used but have heard of many failing, wether thats true or not i cant say.
Ive got a cheap ebay special 16" fan on my zook that i just bolted to the back of the stock radiator, no shrouds or anything, seems to peform very well. The zooks do have an advantage though of a really small light stock mechanical fan, so if the thermofan fails, just unbolt, then bolt on the stock fan to the front of the waterpump.
Ive got a cheap ebay special 16" fan on my zook that i just bolted to the back of the stock radiator, no shrouds or anything, seems to peform very well. The zooks do have an advantage though of a really small light stock mechanical fan, so if the thermofan fails, just unbolt, then bolt on the stock fan to the front of the waterpump.
Who is online
Users browsing this forum: No registered users and 63 guests