Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Thermo fans? Ebay special or big brand name?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Thermo fans? Ebay special or big brand name?

Post by ausyota »

I need a thermo fan for my rear mount Radiator setup I am building into my Lux.
Should I go with a big brand name like Davies-craig for around $200 or will a cheapie from Ebay do the same job?
There are stacks of fans on fleabay for around $40-50
is it a case of you get what you paid for or are the cheapies OK?
I would love a twin thermo setup like the Falcons have but they wont fit up to squarer shape of the Lux rad that I am planning on using easilly.
Cheers Paul.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 624
Joined: Mon Aug 21, 2006 8:40 pm
Location: Albany, WA

Post by Kitika »

How big is a hilux radiator compared to an 80 series one? My VY Ls1 radiator is exactly the same size as my radiator. Most modern cars have thermo's you could have a look at what sizes they have close to the hiluxs radiator at the wreckers.
More Suzuki parts going to the big Suzuki Heaven in the sky!
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

I would not use davis craig or ebay.

get good OEM ones they are cheap and haul arse.
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Post by WICKED »

AU Twin Thermos in shroud are cheap and AWESOME!!!
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Thermo fans? Ebay special or big brand name?

Post by bogged »

ausyota wrote:I would love a twin thermo setup like the Falcons have but they wont fit up to squarer shape of the Lux rad that I am planning on using easilly..
fairly sure he said the Falcon ones wont fit up...
or did I read it wrong?
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

Wouldn't cut corners with cooling..... There are good quality aftermarket that move lots of air ( SPAl ) and many of the OE systems are well designed.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Biggest OEM single fan you can fit. BMW, benz etc can be good sources.
This is not legal advice.
Posts: 281
Joined: Tue Jan 28, 2003 10:02 pm
Location: inner west

Post by CJ Burns Esq »

Go for second hand OEM or even source the OEM stuff new.
Seen flea bay ones give up the ghost and a mate had a brand name aftermarket jobby let go and hole his radiator in a remote location.
Nothing wrong with the fitting of the fan either, defect in the fan itself.
CJ
http://www.4wdlinks.com.au/gallery/cjburns7
http://cjburns7.tripod.com
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Re: Thermo fans? Ebay special or big brand name?

Post by jessie928 »

ausyota wrote:I need a thermo fan for my rear mount Radiator setup I am building into my Lux.
Should I go with a big brand name like Davies-craig for around $200 or will a cheapie from Ebay do the same job?
There are stacks of fans on fleabay for around $40-50
is it a case of you get what you paid for or are the cheapies OK?
I would love a twin thermo setup like the Falcons have but they wont fit up to squarer shape of the Lux rad that I am planning on using easilly.
Cheers Paul.
a ford or holden factory fitted twin fan system with integrated shroud is your best bet, you may beable to get something that is narrower.

a single or double aftermarket fan fitted directly to the fins is not as efficient because it does not drag air through the entire radiator, BUT, you can make a shroud and mount the fan to it, that would work. I woudl then use davis craig or OEM fans of the same type not cheap crap.

JEs
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

You definitely want a shroud for a rear mount rad, yeah. Single or double, it's basically a question of the biggest fan you can fit. But if you have a squarish sort of radiator then one big fan is almost certainly going to do the better job.

How are you planning to control it?
This is not legal advice.
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

chimpboy wrote:You definitely want a shroud for a rear mount rad, yeah. Single or double, it's basically a question of the biggest fan you can fit. But if you have a squarish sort of radiator then one big fan is almost certainly going to do the better job.

How are you planning to control it?
Just a toggle switch :D
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

Ford and holden spend bucket loads of R&D money on systems. If your going for a custom set up already then why not use a complete falcon or commo radiator, fan and shrowd set up in the rear? You will then know the system will work as well as being easily replaceable.
Warn - Dont leave home without it
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

ausyota wrote:
chimpboy wrote:You definitely want a shroud for a rear mount rad, yeah. Single or double, it's basically a question of the biggest fan you can fit. But if you have a squarish sort of radiator then one big fan is almost certainly going to do the better job.

How are you planning to control it?
Just a toggle switch :D
I object to that! For twenty bucks you can control it much better and it will last longer too. You don't need a pricey adjustable temperature switch, just get a fixed-temp switch to suit your running temp eg: http://www.outerlimits4x4.com/ftopic147839.php

They are not expensive. You could get a two-speed one as well, I pinched a big resistor from some euro car (I think it was an Audi) at a pick-a-part to run my 16" fan at half speed when the a/c is on or when the fan is needed but it's not THAT hot yet. It's not just for wank factor, it is safer, the fan lasts longer, and you don't have to watch your temp gauge all the time. And, half speed is much much quieter.
TRobbo wrote:Ford and holden spend bucket loads of R&D money on systems. If your going for a custom set up already then why not use a complete falcon or commo radiator, fan and shrowd set up in the rear? You will then know the system will work as well as being easily replaceable.
I agree with this if you can physically fit one of them. Not just ford or holden either but anything with a 100% electric cooling system (ie no mechanical fan) and a reasonably powerful engine would do. If you're lucky you might find a complete setup that already has the right hose sizes etc. For some reason (maybe my imagination) some of the euro cars have really grunty electric fans.
This is not legal advice.
Posts: 441
Joined: Sun Nov 07, 2004 2:25 pm
Location: Rockhampton

Post by hj 45 »

What's so bad about Davies Craig stuff? Curious to know as I'm eyeing off a 16 inch thermo and electric water pump.
Posts: 722
Joined: Sat Nov 09, 2002 9:31 pm
Location: Berwick, Melbourne

Post by awill4x4 »

Spal fans.
They're not cheap but they work. My mate Darren at Trikfab modifies the ones below for some very powerful V8 cars. He fits the largest fan motors they build and skewed blades.
The beauty of these ones is in the shroud which incorporate rubber flaps that open with the air pressure of the car as it moves forward and then close when the fans come on making sure all the air is directed through rather than around the radiator and fans.
Regards Andrew.

Image
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Post by ausyota »

Does anyone have the measurements of the Falcon twin thermo setup?

I know idealy it would be best to have the falcon radiator with the thermos but I really want the radiator to have a cap on it to help with filling it in the rear and so I dont have to d1ck around with pressurised overflow bottles.
Plus I have a brand new Hilux rad that came with my motor.
If the Falcon thermos come close to fitting I will just adapt them and run that.
Coventrys have brand new genuine falcon twin thermos on sale for $190+gst (I think from memory) this month.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Posts: 278
Joined: Fri Nov 30, 2007 4:14 pm
Location: bunbury

Post by troopy94 »

Im running a radiator from a 2.6 magna in the rear of my zook and it has no problem keeping the v6 cool
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

ausyota wrote:Does anyone have the measurements of the Falcon twin thermo setup?

I know idealy it would be best to have the falcon radiator with the thermos but I really want the radiator to have a cap on it to help with filling it in the rear and so I dont have to d1ck around with pressurised overflow bottles.
Plus I have a brand new Hilux rad that came with my motor.
If the Falcon thermos come close to fitting I will just adapt them and run that.
Coventrys have brand new genuine falcon twin thermos on sale for $190+gst (I think from memory) this month.
not sure but they are a perfect fit on MQ patrol radiators
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

As mentioned, Spal is a great brand, Davies Craig i have never used but have heard of many failing, wether thats true or not i cant say.
Ive got a cheap ebay special 16" fan on my zook that i just bolted to the back of the stock radiator, no shrouds or anything, seems to peform very well. The zooks do have an advantage though of a really small light stock mechanical fan, so if the thermofan fails, just unbolt, then bolt on the stock fan to the front of the waterpump.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Post Reply

Who is online

Users browsing this forum: No registered users and 22 guests