If I want to set up my dual batteries to parallel automatically when the winch controller is triggered, is the 100 amp sure power solenoid big enough? They also do the 200 amp but it is more $ ($200 vs $375 respectively).
Any thoughts?
Cheers
Craig
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Is a 100 A solenoid big enough to parallel winch batteries?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Large winches will pull over 400A at max load, depending on vehicle size, winch size/condition, type of use.
100A is too small, but 200A should see you right unless above applies.
Ensure to get a "continuous-duty" type solenoid, and check electrical wholesalers etc as $200 is *way* too much.
cheers
ed
100A is too small, but 200A should see you right unless above applies.
Ensure to get a "continuous-duty" type solenoid, and check electrical wholesalers etc as $200 is *way* too much.
cheers
ed
Who is online
Users browsing this forum: No registered users and 156 guests