Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
so ive got the camshaft cover off, spark plugs out..now..
i need to set the no.1 cylinder at top dead center on compression stroke - manual states that turn the crank shaft and line the notch up with 0 on the cover, no.1 and no.4 rocker arms should be tight with no movement..
no.1 rocker arm is firm, no.4 is loose, and exhaust is looser than intake?!! is this normal? i rotated the crankshaft 360 degrees and lined it up with the 0 again n checked the 1 and 4 rocker arms and no.1 is loose and 4 firm...but no.1 rocker arm isnt as loose as no.4 when i forst checked it...
is no.4 rocker way out?
wat to do? im good with mechanical things juz need a lil guidence - i can do this lol
will update soon 
