Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hilux IFS 99 axel leak???

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 653
Joined: Tue Feb 17, 2009 9:48 am
Location: Mt Isa QLD

hilux IFS 99 axel leak???

Post by Kingston_99 »

i just replaced my axel (CV) seal that sit in the diff on the drivers side. it took me two go's to get the seal sitting correct. i stuffed the first one and got the secound ond in pretty good. now i have put everything back together and filled with oil and it is still leaking when i drive.

now im starting to think: i may have goten the seal wrong (again) or it could be the metal ring thats sits on the seal when you put the seal back on.

has anyone had this problem with theres?

its a hilux 99 IFS and its on the drivers side of the diff
Top
Posts: 653
Joined: Tue Feb 17, 2009 9:48 am
Location: Mt Isa QLD

Post by Kingston_99 »

so no one has had this problem before then, must be just my luck
Top
Posts: 653
Joined: Tue Feb 17, 2009 9:48 am
Location: Mt Isa QLD

Post by Kingston_99 »

well no one seams to have had this problem before then??

not to worry i fixed the leak today. i ended up goin throught 3 seals over the hole job haha. but anyway i jus wacked a new seal in and put some toyota gastek sealer around the metal case on the seal and wacked her in and then ran another bead of seal around the edge and worked it in with my finger and seams to have done the job.

fingers crossed
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests