Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

drum to disk axle question

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 388
Joined: Wed May 14, 2008 6:01 pm
Location: the sticks gippsland

drum to disk axle question

Post by waandy »

im converting my new project to a disk rear end, will the axles and centre out of the drum rear wnd fit in? and do i just need a few new brake lines to hook the calipers up?
85 hi top drover, 31s, 2 inch exended shackles 2 inch bl.
88 tb42 swb mav,35 claws, 4 inch lift
Top
Posts: 105
Joined: Fri Jul 04, 2008 8:47 pm
Location: brisbane

.

Post by cspgq »

no the drum axles dont fit. they a bit shorter and the studs are a different pattern. from memory the brake lines are different aswell.
Top
Posts: 27
Joined: Fri Sep 03, 2004 2:31 pm
Location: Mount Barker, SA

Post by thwack »

Brake lines are the same, on both disk and drum. But the axles are different lengths. You could theoretically keep the drum axle tube and just bolt on the disk and caliper ends with a little adjustment but hen you would need custom length axles, not an easy/cheap option. So the easiest way is to just swap the whole axle assembly over.

Cheers Thwack
'88 GQ LWB Diesel
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 117 guests