Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
troopy
Moderators: toaddog, Elmo, DUDELUX
troopy
im going to look at another troopy soon its a 78 series i am pretty sure but its fitted with a 1hdtfte (not intercooled one from the 100) i am pretty sure its from a table top. i know the conversion has been done by the owner but before i go in looking just wanted to ask is this a pretty well strait forward bolt in affair aside from some wiring. im trade qualified so i should be able to spot whats been changed however its pretty easy to miss small things that have been overlooked when your excited about getting another car. anyhow essay aside some feedback would be great.. also is the 78 a 6 or 5 stud axle i am almost certain there was a change around that vintage or maybe later in the 79s..
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)
What torque? Tighten it till it strips and then back it off half a turn.
What torque? Tighten it till it strips and then back it off half a turn.
78/79's are 5 stud, they changed from 6 to 5 stud when they went from the 75 to 78/79 series.
Early 78/79's had problems in the R151F gearbox with the splines in a 2 piece output shaft failing, and then the troopy goes nowhere. I think it was up to sometime in 2002 or 2003 when the 2 piece shaft was replaced with a single piece shaft. But having the turbo engine, I assume that the shaft would have already been replaced, or maybe a stronger turbo gearbox that came with the factory turbos (H151F) was put in with the engine.
Early 78/79's had problems in the R151F gearbox with the splines in a 2 piece output shaft failing, and then the troopy goes nowhere. I think it was up to sometime in 2002 or 2003 when the 2 piece shaft was replaced with a single piece shaft. But having the turbo engine, I assume that the shaft would have already been replaced, or maybe a stronger turbo gearbox that came with the factory turbos (H151F) was put in with the engine.
its a neighbour of someone i know that owns it , the 1hz that was factory fitment threw a leg out of bed upon turbocharging so an engine from a mines tray back that had its ass run over by a mine dumptruck was sourced and put in its place , its at quite a good price for 10 grand and a shitload of accesories on it you cant pass that up.
Beep. Beep. Beep.. Whats that sound? Oh Look Its Just Another ZD30 On A Tow Truck.. =)
What torque? Tighten it till it strips and then back it off half a turn.
What torque? Tighten it till it strips and then back it off half a turn.
Who is online
Users browsing this forum: No registered users and 1 guest