Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

best size rim for 315/75/16 claws?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 65
Joined: Thu Jan 26, 2006 7:45 pm
Location: Calliope QLD

best size rim for 315/75/16 claws?

Post by scmick »

Hey guys, did a search and couldnt find anything, what size rim do you think is best suited for 315/75/16 claws? 16 x 10 or 16 x 8, they are currently on factory GU rims but scrub on my control arms at full lock, they are on a GQ shorty with 3 inch spring and 2 inch body lift, cheers Mick :D
Twin locked 75 cruiser project
Top
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Contact:
Contact alien

Post by alien »

12.5" wide tyre - so 10" rim i reckon
The worst thing about censorship is ███████.
Top
Posts: 1711
Joined: Mon May 10, 2004 7:19 am
Location: Kalgoorlie WA

Contact:
Contact roverrat

Post by roverrat »

depends .... off road 16x8 on road 16X10
We are put on this earth for one thing, and one thing only, to die. What you do in the mean time is entirely up to you!

http://www.outerlimits4x4.com/ftopic52067.php
Top
Posts: 960
Joined: Mon Feb 23, 2004 10:57 am

Post by Ryano »

16x8 N22 - Brings it out to reduce steering lock issue while keeping it under the flare.
16x10 are a good fit aswell but tend to stick out past the flare.

Cheers,
Ryano
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Post by 80's_delirious »

Im running the same size MTZs on 16x8. They have less offset than 16x10s, I had narrower 33s on 16x10s and had scrubbing issues, no scrubbing problem now, and less problems with crap in beads.

As claws are far from being a road tyre, Id focus on whats best for offroad ;)
Top
Posts: 435
Joined: Fri Jun 18, 2004 2:41 pm
Location: Perth

Post by steel »

if all your trying to fix is the scrubbing, then all you need to do is adjust your steering lock stops ;)
Top
Posts: 65
Joined: Thu Jan 26, 2006 7:45 pm
Location: Calliope QLD

Post by scmick »

steel wrote:if all your trying to fix is the scrubbing, then all you need to do is adjust your steering lock stops ;)
Two of the gu rims are cracked so im getting new rims, probly just steel wheels like sunnys or pro comps series
Twin locked 75 cruiser project
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests