Just blown up my tb 42 wondering if the 4.5 or 4.8 fits straight in or not?????
weather the G-box engine mounts computer exhaust are all the same????
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TB 42 CAN IT BE INTERCHANGED WITH LATER MODEL PETROL ENGINES
A speed camera would have prevented that!
Some info for someone else that may try it.
The plan was to swap the intake manifold from the 4.2 and put it on to the 4.5 motor keeping all the wiring the same.
The intake studs on the 4.5 are set up the opposite to the 4.2 so the intakes cant be swaped.
The 4.5 oil filter housing is water cooler or heated.(may be able to swap this still working on it) THIS IS OK NOW UNBOLTED HOUSING .
The bottom radiator hose is differant as well. (comes of the engine at a differant angle.)
The Dissy is differant. the coil is is the dissy on the 4.5. and has a 8 pin plug compaird to the 4 pin plu on the 4.2. as well the gear drive is not the same and the 4.2 shaft sits in a bush under the gear where the 4.5 does not.
Have not got the motor back in yet. I may need to add more to this.
The plan was to swap the intake manifold from the 4.2 and put it on to the 4.5 motor keeping all the wiring the same.
The intake studs on the 4.5 are set up the opposite to the 4.2 so the intakes cant be swaped.
The 4.5 oil filter housing is water cooler or heated.(may be able to swap this still working on it) THIS IS OK NOW UNBOLTED HOUSING .
The bottom radiator hose is differant as well. (comes of the engine at a differant angle.)
The Dissy is differant. the coil is is the dissy on the 4.5. and has a 8 pin plug compaird to the 4 pin plu on the 4.2. as well the gear drive is not the same and the 4.2 shaft sits in a bush under the gear where the 4.5 does not.
Have not got the motor back in yet. I may need to add more to this.
RIGHT FOOT FOR GO!!!
Who is online
Users browsing this forum: No registered users and 8 guests