Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

TB 42 CAN IT BE INTERCHANGED WITH LATER MODEL PETROL ENGINES

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 21
Joined: Mon Jan 26, 2009 8:53 pm
Location: Kallangur, QLD

TB 42 CAN IT BE INTERCHANGED WITH LATER MODEL PETROL ENGINES

Post by Green_Troll »

Just blown up my tb 42 wondering if the 4.5 or 4.8 fits straight in or not?????
weather the G-box engine mounts computer exhaust are all the same????
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Post by PGS 4WD »

Yep, I have a TB48 with a TB45 gearbox in what was a 2.8 TD GU, some mods but nothing to serious

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

PGS 4WD wrote:Yep, I have a TB48 with a TB45 gearbox in what was a 2.8 TD GU, some mods but nothing to serious

Joel
Your story is no good without pictures.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Posts: 202
Joined: Thu Jan 10, 2008 7:27 pm
Location: rocky

Post by Wilba »

RN,Chill out man! His story is fine, you don`t need photos troll grab a tb48 and bolt it in. Computor won`t be the same bra but a good aftermarket job will be a top investment .(makes it easy when you bolt a turbo on it later). Billy
Inya Racing..
Posts: 64
Joined: Sun Aug 26, 2007 4:49 pm
Location: perth W.A

Post by MUNGA GQ »

Some info for someone else that may try it.

The plan was to swap the intake manifold from the 4.2 and put it on to the 4.5 motor keeping all the wiring the same.

The intake studs on the 4.5 are set up the opposite to the 4.2 so the intakes cant be swaped.
The 4.5 oil filter housing is water cooler or heated.(may be able to swap this still working on it) THIS IS OK NOW UNBOLTED HOUSING .
The bottom radiator hose is differant as well. (comes of the engine at a differant angle.)
The Dissy is differant. the coil is is the dissy on the 4.5. and has a 8 pin plug compaird to the 4 pin plu on the 4.2. as well the gear drive is not the same and the 4.2 shaft sits in a bush under the gear where the 4.5 does not.

Have not got the motor back in yet. I may need to add more to this.
RIGHT FOOT FOR GO!!!
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest