Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
06' Hilux Sr Recovery Points???
Moderators: toaddog, Elmo, DUDELUX
06' Hilux Sr Recovery Points???
I have an attachment for the tow-ball at the rear, however for some strange reason there are no points on the front? Assuming the welded tie-down points are not worth crap. Can you purchase pre-fab points or am i better off getting it engineered?
You can buy a recovery hook from K & N heres a pic below -
I beleive it's made out of 8mm steel and has a tab on top to help spread the stress......
I have heard thou of some people bending them when snatching someone not directly in front of them but slightly off centre to the vehicle.
I didn't like how low it hung down so I made my own for my hilux out of 10mm steel plate with more mounting points and more support and higher clearance.
Heres my version -
Loosely fitted to the vehicle -
With ARB bar splashguard modified to suit and right hand standard tow hook cut off -
My version is shorter, stronger, give more clearance and I dont have the factory tow hooks anymore to get hung up on rocks....
Hope that helps.[/img]
I beleive it's made out of 8mm steel and has a tab on top to help spread the stress......
I have heard thou of some people bending them when snatching someone not directly in front of them but slightly off centre to the vehicle.
I didn't like how low it hung down so I made my own for my hilux out of 10mm steel plate with more mounting points and more support and higher clearance.
Heres my version -
Loosely fitted to the vehicle -
With ARB bar splashguard modified to suit and right hand standard tow hook cut off -
My version is shorter, stronger, give more clearance and I dont have the factory tow hooks anymore to get hung up on rocks....
Hope that helps.[/img]
[url]http://www.monsterrides.com.au[/url]
there arnt any holes there like on previous generation hilux's........berad wrote:Can i ask why you wouldn't just bolt the hook to the oem threaded holes in the hanger?, or are they not there on ifs models?
the back hole is in the side of the crossmember and bracket but the front hole is bolted through the lower portion of the arb bar mount......
toyota messed up in this respect
[url]http://www.monsterrides.com.au[/url]
Who is online
Users browsing this forum: No registered users and 0 guests