Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

99 challenger transfer case issue

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

99 challenger transfer case issue

Post by DIRTY ROCK STAR »

Hey there i come seeking some mitsu wisdom.

a mates old man has a 99 challenger v6.
the transfer case cracked and resulted in a blown gearbox and transfer i believe.
he got repairs done i believe he got a 2nd hand gearbox etc and got it reco'd. i heard the figure of 7grand mentioned and almost poo'd.
its been about 6 months and the same crack has appeared in the housing of the transfer.
is this a common problem with these vehicles or is it more a case of, your car has issues champ?

any help on this appreciated from those in the know.

cheers

Twon
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

I've never heard anything like it. AFAIK, (oil wise) gearbox & transfer are completely separate, so I don't understand how a crack in the transfer can drain the oil from the gearbox.

I suggest his vehicle has problems (or he's driving it REAL hard.)
Posts: 2739
Joined: Sat Oct 26, 2002 7:50 am
Location: Melbourne

Post by Bitsamissin »

Yep agreed this is very rare indeed.
It is happening to some Gen 3 auto's as the t/case hangs way out and is exposed but this is due to impact damage.
The Challenger and earlier Jabbers have a decent bash plate there instead.
Can you tell us exactly where the cracks happened - extension housing ?
And yes the t/case and 5sp are connected but the oil supplies are sealed within each unit.
I just luv my "clacker Jabber"
Posts: 191
Joined: Sat Jan 18, 2003 6:23 pm
Location: melb

Post by pickle »

Bitsamissin wrote:Yep agreed this is very rare indeed.
It is happening to some Gen 3 auto's as the t/case hangs way out and is exposed but this is due to impact damage.
The Challenger and earlier Jabbers have a decent bash plate there instead.
Can you tell us exactly where the cracks happened - extension housing ?
And yes the t/case and 5sp are connected but the oil supplies are sealed within each unit.
Seen it once on a paj due to wind up. Not running around on the tar in 4x4 is he?
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

cheers guys ive passed on the info and asked the Q's as to 4x4 on tar, and yes how did it damage gbox?
my knowledge of mitsubishi is practically none, so waiting for the info to come backfrom his old man.
but its sounding as if hes challenger is a dud?
i dont think he does much 4wding, abit of beach work would be it.
so possibly hes been driving it on tar in 4wd?
just waiting to hear back.

thanks guys
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests