Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Front 3/4 elliptical with shackle reversal

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Front 3/4 elliptical with shackle reversal

Post by mrRocky »

After putting 3/4 elliptical on the rear of my daily zook, ive been considering using part of a calmini shackle reversal along with 3/4 spring on the front of my buggyzuk. The rear has good flex and has a coil sprung surf diff, the front is spoa hilux with zuk leafs.
Just want a bit more flex out of the front without going to coils, with my only other option being ruf i spose
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

I've always wondered what that would be like. Can't offer you any advice though save to say that I think it may be very tricky, I think steering may be an issue.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Post by Gwagensteve »

I can't see the point. It's a lot of work for a very minimal gain - The shape of the chassis at the front means the buggy leaf can't do much.

I ran SR and 3/4 on the front of my car years ago (like in 1997) and it wasn't worth the effort.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Re: Front 3/4 elliptical with shackle reversal

Post by joeblow »

mrRocky wrote:After putting 3/4 elliptical on the rear of my daily zook, ive been considering using part of a calmini shackle reversal along with 3/4 spring on the front of my buggyzuk. The rear has good flex and has a coil sprung surf diff, the front is spoa hilux with zuk leafs.
Just want a bit more flex out of the front without going to coils, with my only other option being ruf i spose
got a 6 foot slip joint handy?
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

put hilux front leaves under it - they flex wicked with 3 leaves in the pack (load leaf removed). youll need to extend the chassis 120mm or so to do it though, and re-fabricate rear end mounts as well as new perches on the diff (a lot of work) - plus then you need new brake lines and front driveshaft... and shocks... and... (lol)
The worst thing about censorship is ███████.
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

Go the RUF makes a huge difference and well worth the effort. Other than that I wouldn't bother chasing huge amounts of flex. Gearing and lockers are much better idea than lots of flex
Ransom note = demand + collage
Posts: 904
Joined: Mon Feb 19, 2007 6:10 pm
Location: Perth

Post by mrRocky »

Yeah just wondered if it was possible as ive never seen it on a car before.
Looks like hilux rears it is then.
Alien i cant beleive your car is 100% legal it looks like absolute copbait every time i see it. Do you get pulled over much, i assume you take great pleasure in waiving permits infront of the cops face when you do ?
Posts: 3513
Joined: Tue Feb 15, 2005 12:52 am
Location: Perth, WA

Post by alien »

mines hilux fronts... hilux rears are too long and completely ruin approach angle =)

You know what? before i did the mods i got pulled over HEAPS! (2" lift and 215/75r15 HTs) - mainly cos i had p plates and nearer to the end a welded rear =) haha but mainly speeding or "looked like i was going too fast around that corner"... since the mods i've actually not been pulled over at all... had plenty of sideways looks from passing cop cars, but i assume they run my plates and it comes up that its been engineered and leave me alone.

So yeah - i've been dying to wave papers in someones face - but not had the opportunity in nearly 2 years now!
The worst thing about censorship is ███████.
Posts: 4882
Joined: Fri Nov 08, 2002 8:36 pm
Location: Medowie, NSW

Post by redzook »

alien wrote:mines hilux fronts... hilux rears are too long and completely ruin approach angle =)

You know what? before i did the mods i got pulled over HEAPS! (2" lift and 215/75r15 HTs) - mainly cos i had p plates and nearer to the end a welded rear =) haha but mainly speeding or "looked like i was going too fast around that corner"... since the mods i've actually not been pulled over at all... had plenty of sideways looks from passing cop cars, but i assume they run my plates and it comes up that its been engineered and leave me alone.

So yeah - i've been dying to wave papers in someones face - but not had the opportunity in nearly 2 years now!
actually hilux rears will give you a better approach angle then hilux fronts :)
Team UNDERDOG #233
WERock Australia thanks to
[url]http://www.longfieldsuperaxles.com[/url]
[url]http://www.rockbuggysupply.com[/url]
Posts: 355
Joined: Fri Jan 09, 2009 2:17 pm
Location: Maitland, where the best are built

Post by 31zook »

alien wrote:mines hilux fronts... hilux rears are too long and completely ruin approach angle =)

You know what? before i did the mods i got pulled over HEAPS! (2" lift and 215/75r15 HTs) - mainly cos i had p plates and nearer to the end a welded rear =) haha but mainly speeding or "looked like i was going too fast around that corner"... since the mods i've actually not been pulled over at all... had plenty of sideways looks from passing cop cars, but i assume they run my plates and it comes up that its been engineered and leave me alone.

So yeah - i've been dying to wave papers in someones face - but not had the opportunity in nearly 2 years now!
yeah I've had cops trail me for a couple of minutes then realise my truck is engineered and wave as they go pass... I don't bother running mud flaps because they just get ripped off, and if they want to pin me over that instead of the extra holes drilled for the ruf and the front extension shackles...
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests