Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
EFS springs
Moderators: toaddog, Elmo, DUDELUX
EFS springs
i have a 92 dual cab hilux with 2in old man emu springs all round and the front is sagging a fair bit and the rear doesnt flex for shit. How have people found the EFS 3in lifted springs is terms of flex and comfort? will it be much better than my current springs in flex and comfort?
they are good on the front... you have to add a few extra springs on the front RHS to stop the sag from the weight of the driver and fuel tank. But these are awsome springs in the front.
The rear are ok, but you have to remove the spring clamps and lighten the packs to get reasonable flex... (they do flex better then standard but could be better)
All in all, the have a good ride and i would recommend but i did change my rear leafs to coils after having the springs for 12months...
Hope that helps..
Brad
The rear are ok, but you have to remove the spring clamps and lighten the packs to get reasonable flex... (they do flex better then standard but could be better)
All in all, the have a good ride and i would recommend but i did change my rear leafs to coils after having the springs for 12months...
Hope that helps..
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Do they still make the 3 inch ones? I was told they only make the 2 inch now could be wrong.
Anyways I put the 2 inch lifted efs springs in the front of my lux about 4 months ago and they are already sagged heaps and bent upwards, heaps worse on the driver side, was told it was a "bad batch of springs made" and getting a new set on warrenty tomorrow but I'm not going to use them.
Anyways I put the 2 inch lifted efs springs in the front of my lux about 4 months ago and they are already sagged heaps and bent upwards, heaps worse on the driver side, was told it was a "bad batch of springs made" and getting a new set on warrenty tomorrow but I'm not going to use them.
it depends alot to do with what weight you are carrying, i got them through surperior engineering, and dealing through them meant i told them exactly what i had (winch, bull bar, diesel, duel batteries etc.) and they added the load springs to suit.
To fix the extra lean on the drivers side i cut down a spring outy of the factory front RHS sping and added it to the pack along with the added springs surperior added.
Once i went coils rear i removed the tank on the RHS and put a prado 80L tank under the tray in the centre.. and then removed the extra spring on the RHS (the lean was then gone.
I have been driving for 4 years on the EFS front 3" springs.
To fix the extra lean on the drivers side i cut down a spring outy of the factory front RHS sping and added it to the pack along with the added springs surperior added.
Once i went coils rear i removed the tank on the RHS and put a prado 80L tank under the tray in the centre.. and then removed the extra spring on the RHS (the lean was then gone.
I have been driving for 4 years on the EFS front 3" springs.
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
79 Series......Pulled out my OME after 3 years of heavy loads & of road... had no flex & ran Polyair Bellows to make things worse but to carry big amounts its needed..
Now all gone & have EFS rear leafs & elite shocks: removed 2nd leaf & had them reset... now excellent compared to before
Front 2 inch longer coils & elite shocks... excellent also & now removed sway bar & huge difference off road ..
Highly recomend.. i dont have any ful flex pics to show you..
look into having them reset which will save you alot of cash...
Now all gone & have EFS rear leafs & elite shocks: removed 2nd leaf & had them reset... now excellent compared to before
Front 2 inch longer coils & elite shocks... excellent also & now removed sway bar & huge difference off road ..
Highly recomend.. i dont have any ful flex pics to show you..
look into having them reset which will save you alot of cash...
6.5 Turbo Chevy in a 2001 patrol wagon with alot of shit on it..
Just had another look and that leaf pack is very very light on ...
Mine has 7 leafs plus 2 heavy load leafs at the bottom..
Also yours are leaf over axle jobies that gives you more clearance but then there are other problems arising... but if not carrying much weight it should not matter
Mine has 7 leafs plus 2 heavy load leafs at the bottom..
Also yours are leaf over axle jobies that gives you more clearance but then there are other problems arising... but if not carrying much weight it should not matter
6.5 Turbo Chevy in a 2001 patrol wagon with alot of shit on it..
Thats how many leafs come in the efs spring pack for a diesel hilux i didnt take any out, your truck would be much heavier then mine, i dont carry much weight at all just a alloy bull bar, my old rockcrawler springs had 1 less leaf then the efs spring and they last nearly 3 years without bending.Towie wrote:Just had another look and that leaf pack is very very light on ...
Mine has 7 leafs plus 2 heavy load leafs at the bottom..
Also yours are leaf over axle jobies that gives you more clearance but then there are other problems arising... but if not carrying much weight it should not matter
Hilux's come standard with leaf over axle
mine are exactly the same wompy..
i got 4 leaves in the front..
except mine arent efs,dont know the brand i just bought em from tjm in caboolture and took 2 load leaves out..i expected it though cause im getting fairly decent flex out of mine and didnt bother putting bump stops in.i thought that caused it.
no spring clamps either.
mine lasted 8 months maybe longer before doing it..
im not concerned much as im doing ruf soon but still wouldnt mind having good quality springs as i paid a bit of money for em.
anyone know what causes it..
cheers..smiley..
i got 4 leaves in the front..
except mine arent efs,dont know the brand i just bought em from tjm in caboolture and took 2 load leaves out..i expected it though cause im getting fairly decent flex out of mine and didnt bother putting bump stops in.i thought that caused it.
no spring clamps either.
mine lasted 8 months maybe longer before doing it..
im not concerned much as im doing ruf soon but still wouldnt mind having good quality springs as i paid a bit of money for em.
anyone know what causes it..
cheers..smiley..
1991 2.8 turbo,ruf,patrol rear springs,inverted 14'' bilsteins,33's,rear locker,winch,sliders plus more...
TUFF MUD 4X4 CLUB!! RIDIN IT DIRTY
TUFF MUD 4X4 CLUB!! RIDIN IT DIRTY
yer I've seen that, I had a look at them when I took the efs springs out and they didn't look as bad anyways I've ordered the classic front lift kit from locktup and I ordered new 3 hole spring perches to come with it.chunks wrote:Wompy in your second pic your spring perch looks completely farked. Looks like you need to sort that asap.
Yeh it is caused from the springs either being too soft or not enough springs in the pack.83-mud-lux wrote:mine are exactly the same wompy..
i got 4 leaves in the front..
except mine arent efs,dont know the brand i just bought em from tjm in caboolture and took 2 load leaves out..i expected it though cause im getting fairly decent flex out of mine and didnt bother putting bump stops in.i thought that caused it.
no spring clamps either.
mine lasted 8 months maybe longer before doing it..
im not concerned much as im doing ruf soon but still wouldnt mind having good quality springs as i paid a bit of money for em.
anyone know what causes it..
cheers..smiley..
I have duel batteries in the engine bay, steel bull bar, steel side rails+ steps, winch, diesel etc. Superior added a extra load sring on both sides and then i added another spring 300mm long on the drivers side to help with the extra weight on the RHS.
Now they have not sagged in about 4 years of hard driving... and the only thing that limits my flex is the length of the shocks (they get fully extended and fully compressed)
When you change the springs you have to check weather the spring perches are square or weather the outside edges are slightly bent, as this will help them bend, same thing your 'u' bolts need to be tight and a torque rod needs to be used if you have the factory push pull steering.
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
My springs look like this on full travel up, with shock compressed all the way and bumpstops compressed.wompy wrote:This is the flex I'm getting in my lux with 2 inch efs front springs, it's got a 2.8 L diesel with a alloy bullbar that's it.
The driver side started to go like this only like a week or 2 after putting them in
the passenger side also bent
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Who is online
Users browsing this forum: No registered users and 22 guests