Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

1996 Coily Sierra rebuild with 3.8L V6

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 62
Joined: Thu Aug 20, 2009 6:10 pm
Location: Brisbane QLD

1996 Coily Sierra rebuild with 3.8L V6

Post by Mitchie »

Hey guys me again.

Yes my mate and I are going to build it.
And yes I know alot of people dont like this conversion but
I DONT CARE WE WANT TO DO IT AND ITS OUR CHOICE!

Ok here is they layout so far.

We have:
* 1996 Coil Sprung Suzuki Sierra wreck.
* VN Commodore 3.8L V6 and Turbo 700 Auto
* 1983 Hilux Axels and Diffs

Plan
* Plate the rail with 5mm steel and replace the front cross members to strengthen it for the V6.
* Mount the engine right on the fire wall cut out the tunnel to suit the larger gear box.
* Move the front diff forward 5-8" to balance the car out.
* The suspension that will be mounted will only raise the car @40mm above normal but the wheel arches will be cut out and moved higher up to allow for larger tyres.
* It will be a 3 link suspension up front and 5 link rear.

What we don’t have:
* Transfer case, possible setups:
- T700 auto - Marks adaptor - Hilux t/case
- T700 auto - Independent mounted early model Mitsubishi Pajero t/case
- Bell housing from a 94 era 3.2 auto rodeo - Asian Warner auto - Hilux t/case

What are people's suggestions for the transfer case setup? Other possibe setups?
Posts: 62
Joined: Thu Aug 20, 2009 6:10 pm
Location: Brisbane QLD

Post by Mitchie »

if you call this over power have a look at this zook
http://www.4x4offroads.com/1987-samurai-chevy.html
Posts: 1213
Joined: Wed Oct 26, 2005 8:25 pm
Location: SE Melbourne

Post by dank »

Do a build thread in the members area. Let's see how this comes together.

The marks gear is top quality. It would save a HEAP of stuffing around.

Look at lengthening your wheelbase too for a more stable vehicle.
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Posts: 3722
Joined: Sat Jan 18, 2003 7:32 pm
Location: perth wa

Post by bazooked »

why not run an lt230 rover case, incorporates front and rear digs aswell, 1st low in the transfer and t700 are an ideal match if ya want crawl, and adaptors are cheap.
buggy time............
Posts: 62
Joined: Thu Aug 20, 2009 6:10 pm
Location: Brisbane QLD

Post by Mitchie »

bazooked would you know where i would be able to get an adaptor for a lt230 transfer case?
Posts: 3443
Joined: Tue Oct 29, 2002 10:50 pm
Location: Currently On the Road !!

Post by Dozoor »

Ruff , or stange rover May be able to help with the lt230 adapter but it is tight with the front shaft output.

Image

Mq mk wagons had a divorsed case that is pretty robust,
Posts: 319
Joined: Thu Jan 04, 2007 5:21 pm
Location: Canberra

Post by Toecutta »

Do the marks and hilux combo, it will match up with your diffs. Just finished this combo in a vitara. I will tell you how it goes after Willowglen :cool:
LWB Vit, Trail Slayer
Posts: 31
Joined: Tue Aug 11, 2009 9:25 pm
Location: stanwell

Post by google »

cool as thats the go
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests