Pretty sure the search is not working....
Anyways, Im just doing the g13b into a sierra conversion and Im just wondering about the engine mounts.
People have said that you can use the VL commodore ones so I bought a pair and they are basically exactly the same in measurements, but 5mm thicker.
Just wondering if anyone has put these on both sides as this will make it 1cm too tight, also, one of the engine mounts bolts onto the intake manifold bracket which is 4mm thick which means the engine has 14mm less room!
Does it fit? Or should I just try to use the engine mount on 1 side? Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine conversion g13b into sierra- commodore engine mounts?
Who is online
Users browsing this forum: No registered users and 0 guests