Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Joining UHF antenna cable

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 317
Joined: Thu Dec 11, 2008 8:22 pm
Location: Oriental 4WD Adelaide

Joining UHF antenna cable

Post by mhgill »

How do I join UHF antenna cable if its been cut in half?
GQ 5" coils 35" Muds FOR SALE
98 GU 4500 ST Stock.
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Joining UHF antenna cable

Post by bogged »

buy a new length of cable and add joiners at each end.
Top
Posts: 5521
Joined: Tue Jan 13, 2004 12:09 pm

Post by mkpatrol »

You got to Dick Smith & buy some more........or there are a RCA style plugs at Dick Smith you can use as well.
Don't ask me, ask them. I'm just runnin for my life myself.
Well they are all following you...
No they ain't, I'm just in front...............
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

Join the centre cable then wrap in insulation tape, then join the outer shield cable, wrap in foil and wrap in insulation tape again.

Cheers
Top
Posts: 2513
Joined: Sat Mar 05, 2005 1:14 am
Location: ingleburn

Post by familybus »

Struth wrote:Join the centre cable then wrap in insulation tape, then join the outer shield cable, wrap in foil and wrap in insulation tape again.

Cheers
no you dont! you go buy a new length and put new ends on! a bit of water gets in and yah radio is shtuffed! dont take short cuts here or you will loose in the end!
[color=lime][b]Im not a gyno but ill take a look at it for you![/b][/color]
Top
8UFF35T
Banned
Posts: 210
Joined: Tue May 27, 2008 11:00 pm
Location: yes

Post by 8UFF35T »

And this improves the range... am i correct?
Top
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Post by Skegbudley »

8UFF35T wrote:And this improves the range... am i correct?
No.
GU Patrol with go better bits added
Top
8UFF35T
Banned
Posts: 210
Joined: Tue May 27, 2008 11:00 pm
Location: yes

Post by 8UFF35T »

Skegbudley wrote:
8UFF35T wrote:And this improves the range... am i correct?
No.
Does it give a better reception then?? What are the benefits of having two antenna's joined together?

thanks
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

He isnt trying to join two antenna together, he is trying to join a broken antenna cable together.
Motorized three seater couch buildup:

http://www.outerlimits4x4.com/viewtopic ... 0&t=196047
Top
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

Struth wrote:Join the centre cable then wrap in insulation tape, then join the outer shield cable, wrap in foil and wrap in insulation tape again.

Cheers
No. Impedance matching is the key.

This "solution" is likely to reduce signal strength, and give crap reception. Worst case, reflected power could damage your output stage.
Top
Posts: 15
Joined: Mon Aug 31, 2009 12:00 pm
Location: sunshine coast Queensland

Post by acebryan1 »

go to tandy's or dicksmiths and ask for a joiner for a coaxial cable there about $2.95 ish. I have used one for 3 years along with a couple of mates and have had no loss in reception or quality it is the easiest and cheapest way to join one back together.
Top
Posts: 302
Joined: Sun Feb 04, 2007 8:37 pm
Location: Bendigo

Post by krusty182 »

I have used SMA connectors for joining UHF coax cable before. They are available from from Jaycar and are small enough that you can fit them through most antenna mounting holes if you need to.

Need a crimp tool to put them on though.
---> insert witty remark here <---
Top
User avatar
DUDELUX
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Post by DUDELUX »

is there any difference in coax cable from fm cb to uhf??
MrsForby wrote: Oh I desperately truly love the taco.
Top
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Post by Struth »

-Scott- wrote:
Struth wrote:Join the centre cable then wrap in insulation tape, then join the outer shield cable, wrap in foil and wrap in insulation tape again.

Cheers
No. Impedance matching is the key.

This "solution" is likely to reduce signal strength, and give crap reception. Worst case, reflected power could damage your output stage.
Maybe that explains my crappy radio performance ATM.

Go to the shop and buy a new length of cable :D
Top
Posts: 53
Joined: Fri Dec 01, 2006 11:00 am
Location: Wangaratta, Vic

coax

Post by rustynuts »

There is no difference between uhf(477Mhz) and CB(27Mhz) cable they have an impedence rating of 50 ohms both the same size cable (assuming that it is a five watt unit).

As to joining the co-ax cable you the best way to join them is with the proper male and female ends, both that you can find at any radio stockist ie dicks or jcar, once they are joined best to tape or heat shrink (appoxy type) over the top.

In an ideal world the best way to deal with this situation is to replace the whole cable but this can be expensive. Some antenna couplers (antenna to coax)are very expensive.
GQ patrol coil cab/chasis tray
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 144 guests