Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

External Wastegate in GQ

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 9
Joined: Wed May 09, 2007 7:15 pm

External Wastegate in GQ

Post by wish4wings »

Hey all, tried searching but couldnt find any help.
Im about to turbo my td42 with parts ive slowly collected, i have a turbo from another project that isnt getting used but it doesnt have an internal wastegate. Is anyone running external wastgates, if so could you please tell me how you plumbed it into your manifold??
Posts: 134
Joined: Wed Mar 26, 2008 7:32 pm
Location: Brisbane

Post by Big_GQ »

cut a hole and weld in a pipe or buy and adapter between turbo and manifold.
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

you can use one of these...
Image

or you can do it this way
Image

or you can do it this way
Image
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

Post by Nat84 »

oops
Posts: 305
Joined: Mon Apr 21, 2008 8:53 am
Location: New Zealand

Post by garth »

gudday.

how much boost?

Image

Image

ignore the blue hose from inlet manifold to gate as you'll want to install a 'in cab' boost dial in that circuit.

the 'branch off' must face away from direction of exhaust gas flow as much as poss...my angle was a bit flat but I was restricted by suspension tower....you get the idea though.

good luck
GQ with 30 PSI of TD42T.........
Posts: 477
Joined: Mon Mar 21, 2005 3:49 pm
Location: here

Post by DanielS »

Nice setp up, What kind of HP are you getting Garth??

Daniels
V8s are nice, but you cant beat the sound of a turbo working the magic on a juiced up diesel.
Posts: 9
Joined: Wed May 09, 2007 7:15 pm

Post by wish4wings »

Thanks alot for the help guys, much appreciated.
Nat84, in your first photo what is that little adapter called with the wastegate flange on the side and where could i get one from???
Very nice setup garth, how much boost are you running and what sort of power are you making??
thanks again
Posts: 305
Joined: Mon Apr 21, 2008 8:53 am
Location: New Zealand

Post by garth »

have never been interested in dynoing the trucks, as i reckon money is better spent else where. but have based this engine on 200RWKW @ 30psi+....and no cash short cuts.

it goes like a cut cat...still got a few tweaks to make to get some more reliable horsies out.

good luck with project
GQ with 30 PSI of TD42T.........
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Nice pics :twisted:
Posts: 169
Joined: Thu May 15, 2008 3:42 pm
Location: Central Coast, NSW, Australia

Post by SLASH »

Can i ask what the difference is between an internal or external waste gate? Cheers Loz.
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

External wastegate is seperate to the turbo and mounted to the manifold before the turbo as shown in the pics. Internal wastegate is incorporated into the exhaust housing on the turbo. Most factory turbos run an internal gate while an external gate is generally used on bigger setups chasing more power.
Posts: 13
Joined: Mon Apr 27, 2009 11:38 am
Location: Gold Coast

Post by bensbrick »

are external wastegates legal?
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

Yes they just have to be plumbed back into the exhaust system and not venting to atmosphere (screamer pipe).
Post Reply

Who is online

Users browsing this forum: No registered users and 173 guests