Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
single axle car trailer
single axle car trailer
whats youre thoughts on this type of trailer for a sierra or would a tandem be better. cheers ron
it would be very sensitive to vehicle position and you may find the tow ball weight too much if the load was too far forward.
too far back and it would sway like a bitch.
Im not a big fan of single axle trailers that are carrying a large load and I think it would be fairly ugly if you had a blowout at speed.
too far back and it would sway like a bitch.
Im not a big fan of single axle trailers that are carrying a large load and I think it would be fairly ugly if you had a blowout at speed.
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
I thought about the same thing but i decided on a tandem axle because they are heaps nicer to tow and when you consider where you will be towing (4wd parks etc. ie dirt roads) you want it to be as safe as possible.
Tow Rig - 4.2 Turbo Deisel GQ. 5in coils, 2in body, f&r tube bars, sliders, 35's.
Comp Truck - Sierra, ute chop, G16B, 6.5 xfer, exo cage, 34 JT II's, 3/4 eliptical rear, SPOA, 2in body.
Comp Truck - Sierra, ute chop, G16B, 6.5 xfer, exo cage, 34 JT II's, 3/4 eliptical rear, SPOA, 2in body.
I flat tow like below and if I dont have it far enough forward I can't go over 80 odd for any length of time and down hills become very interesting very quicklyajsr wrote:it would be very sensitive to vehicle position and you may find the tow ball weight too much if the load was too far forward.
too far back and it would sway like a bitch.
Im not a big fan of single axle trailers that are carrying a large load and I think it would be fairly ugly if you had a blowout at speed.
So yer as said positioning would become important, but after a while I imagine you would find the sweet spot for your car on it so if you can get one cheap enough I would say go for it.
'92 Rodeo - VR V6, T700, 31's
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
No good, unless you use an exotic axle set up, you are limited to 1000kg per axle, you will be hard pressed to find a sierra under 1200 kgs and you have to include the weight of the trailer in the total, that's why the hire tandem car trailers have a 1200kg to 1500kg limit, 2 axles 2000kg less the weight of the trailer.
If you really want to go single axle (and I think it is a bad idea) consider duel wheels and hubs from a Mazda easy loader or the imported Toyota equivalent (hard to find but much larger bearings and brakes)
the reason I think it is bad is the load spread, on a single axle trailer the entire load is supported at two points (each end of the springs) 6-700mm apart, with a tandem axle this is doubled spreading the support making the trailer much stronger.
Peter.
If you really want to go single axle (and I think it is a bad idea) consider duel wheels and hubs from a Mazda easy loader or the imported Toyota equivalent (hard to find but much larger bearings and brakes)
the reason I think it is bad is the load spread, on a single axle trailer the entire load is supported at two points (each end of the springs) 6-700mm apart, with a tandem axle this is doubled spreading the support making the trailer much stronger.
Peter.
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
The previous owner used to tow a Surf buggy on it and he had a spool'd rear, the only time he had a problem was when he forgot to put oil in his diffdad wrote: I was contemplating building something similar, but with my CIG lockers,
i dont think it would turn very well...
I just pump my tyres up to 40 odd psi and try to avoid tight turns and I havent mastered reversing around a corner yet, but mines a lockright rear.
'92 Rodeo - VR V6, T700, 31's
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
Not sure how you think a Sierra under 1200kg would be hard to find, considering they weigh less then that in standard form.droopypete wrote:you will be hard pressed to find a sierra under 1200 kgs
Mine was weighbridged at 1040kg earlier this year with a full tank of petrol. I am sure if i ditched all the bash plates, bar work and all the extra strengthning it would go under 1000kg without to many hassles.
If God did not intend for us to eat animals, then why did he make them out of meat?
my zook,tin top,31s front bar,sliders,exo,full size spare,full tank of fuel etc came in at 1220 over the bridge.
VR rodeo i like the way you tow your zook if you do get it positioned ok is 100km/h fine?
VR rodeo i like the way you tow your zook if you do get it positioned ok is 100km/h fine?
sierra truggy,37 sticky treps,propane,6.5s and disconnect,lux diffs with spools,16" fox shox,hydro steer.
Never actually saw Duncans one, he may have borrowed this one occassionally, but I know it was built for Zbeast and I bought it off him.nicbeer wrote: VR - Is that Duncans old mobitow trailer?
Yer I have got it sussed now and it sits on 100 nicely. It makes life so much easier, no more running around trying to hire a trailer for the weekend and then worrying about getting it back on time, plus it takes up around the same room as a 6x4. The only hassle was having to remove the rear driveshaft when towing, but I fixed that with a rear disconnectTurbo Tonka wrote: VR rodeo i like the way you tow your zook if you do get it positioned ok is 100km/h fine?
'92 Rodeo - VR V6, T700, 31's
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
Is there anything wrong with putting the rear on the trailer ??VR Rodeo wrote:Never actually saw Duncans one, he may have borrowed this one occassionally, but I know it was built for Zbeast and I bought it off him.nicbeer wrote: VR - Is that Duncans old mobitow trailer?Yer I have got it sussed now and it sits on 100 nicely. It makes life so much easier, no more running around trying to hire a trailer for the weekend and then worrying about getting it back on time, plus it takes up around the same room as a 6x4. The only hassle was having to remove the rear driveshaft when towing, but I fixed that with a rear disconnectTurbo Tonka wrote: VR rodeo i like the way you tow your zook if you do get it positioned ok is 100km/h fine?
Obviously you would need to secure the steering wheel straight!
JB
I have never tryed it, but I dont see why not.JWB wrote: Is there anything wrong with putting the rear on the trailer ??
Obviously you would need to secure the steering wheel straight!
'92 Rodeo - VR V6, T700, 31's
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
'89 Zook - 4 inch lift, 32's, 5.14 gears, RUF, F&R Lockrights, Rear Disconnect, Falcon/Landcruiser PS
You either have a lot of rust or a dodgy weighbridger0ck_m0nkey wrote:
Mine was weighbridged at 1040kg earlier this year with a full tank of petrol. I am sure if i ditched all the bash plates, bar work and all the extra strengthning it would go under 1000kg without to many hassles.
1200 may have been a bit on the chubby side, but a zook need to be stripped bare to get close to 1000kg.
Peter.
Cable bracing is the way of the future!
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
v840 said "That sounds like a booty fab, hack job piece of shit no offence."
Who is online
Users browsing this forum: No registered users and 69 guests