Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

getting your keys from a hilux

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 50
Joined: Sat Feb 07, 2009 7:41 am
Location: kellyville

getting your keys from a hilux

Post by big_fyt »

ok so last night i felt like a dickhead locking my keys in my car first time i have ever done it so i had problems getting them out.

i have to thank neigel from tassy for telling me to bend 1 butter knife 90' and another 1 stay straight.

slide the 90' under the seal of your quarter panel window this knife will pull your button on the latch.

the next knife put on the vertical seal of the quarter panel and try and lock it in behind the lever, slide across and you are into your hilux get a little person like your mrs to get their arm in to either grab keys/ open lock or winde down the window.


i hope this helps somebody in the future when i get a chance i might chuck a photo up cause this was pretty easy for me and worked first try and might save the next person half an hour. i know there are other ways but this is pretty simple and easy to do providing you are at home or have access to butter knifes or similar thin metal.

bigfyt
Posts: 3038
Joined: Thu Aug 05, 2004 10:06 pm
Location: VIC

Post by dogbreath_48 »

It's scary how easy it is to get through those 1/4 windows. Using butter knives is a good idea - I'm usually going at it with my antenna whip and a coathanger :oops:
Tetanus rolling on 37's
Posts: 876
Joined: Sun Dec 21, 2008 4:28 pm
Location: Gympie

Post by Matt_85Lux »

with a flat screwdriver you can pry the rubber from the corner of the 1/4 glass (it only really sits in there) and then with a coat hanger you can hook the keys and pull them out, have done it a few times. Fitted remote central locking now to prevent it from happening
Posts: 79
Joined: Mon Dec 04, 2006 5:53 am
Location: Middlemount, QLD

Post by diby_2000 »

I've found 2 weling rods also woks well
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Post by macca81 »

gimmie a foot of packing tape and i can be in my hilux or any of my mates 4wds in under 20 secs. i know a bloke that used to work for a caryard and could get into most cars in about 5 secs, saw him get in one in less that 2 secs... scary
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Posts: 165
Joined: Thu Oct 30, 2008 6:40 pm
Location: deception bay, QLD

Post by builtlux88 »

y dont we just put more idea out there so there is more lux thefts!!!
1n106 coil'd, 39.5 iroks, locked, bobbed, tubbed, dovetaild, highsteer and heavy right(UNDER CONSTRUCTION)
Posts: 729
Joined: Sat Aug 07, 2004 11:42 pm
Location: Maitland

Post by revin »

because its a slow get away :finger:
2001 100 series stock as a rock
Posts: 126
Joined: Sun Feb 08, 2004 12:14 am
Location: central coast

Post by mental1 »

butter knife bugger that use a fork bend the two outer prongs in opposite directions against the fork then stick the two left over prongs in the lock give it a jiggle and a turn and hey presto. i lost my keys for a week. work on the door and the ignition. after a couple of days you dont seem to know any different until the cops grab you and start asking why your breaking into a car with a fork
IF IN DOUBT GO FLAT OUT
Posts: 207
Joined: Thu Sep 20, 2007 4:37 pm
Location: victoria

Post by johno88 »

now you got you keys out, its not a bad idea to get one cut and zip tie it up under the car some where, i have a nasty habbit of locking keys in the lux and this gets me out of trouble every time.
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Post by ledgend80 »

yeah but when he zip ties it under the car and the keys are locked in the car and the toolbox with the side cutters/ stanley knife is in there to what does he do then. but it is a good way to get in if you have quater glass. was amazed the first time i seen it done. its only the dishonest people that will break in to it any way.
Posts: 64
Joined: Fri May 01, 2009 10:53 am
Location: Sydney

Post by wompy »

2 bent teaspoons work a treat too :roll:
1996 LN 106 Dual Cab, 4 inch flex kits front and rear from www.locktup4x4.com.au 285/75r16 Mickey Thompson Baha MTZ, Alloy bull bar and side steps, Lightforce 240s
Posts: 207
Joined: Thu Sep 20, 2007 4:37 pm
Location: victoria

Post by johno88 »

ledgend80 wrote:yeah but when he zip ties it under the car and the keys are locked in the car and the toolbox with the side cutters/ stanley knife is in there to what does he do then. but it is a good way to get in if you have quater glass. was amazed the first time i seen it done. its only the dishonest people that will break in to it any way.
you dont need cutters or stanley knife to cut the cable ties, you just twist the key around and they break, you only need a 3mm wide cable tie.
Posts: 158
Joined: Tue Jul 04, 2006 2:22 pm
Location: Brisbane Gleneagle

Post by cookiesmonsta »

1 Brick
80 series dual cab full internal cage 5 inch lift GU diffs cutting brakes with front and rear lockers winch on 38's
A.G.Cook Excavator Hire 0429167911
Post Reply

Who is online

Users browsing this forum: No registered users and 81 guests