Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

turbo specialists melbourne

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 37
Joined: Tue Jul 18, 2006 11:15 am
Location: shepparton victoria

turbo specialists melbourne

Post by rob_rover »

hi
after contact details of turbo specialists in melbourne to source quotes for tb42 efi turbo conversion

cheers rob
Top
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Post by ledgend80 »

mate pm dzltec on here
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

JPC is the best around mate give Mark a call on 94692566
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ledgend80 wrote:mate pm dzltec on here
Correct - Diesel tec
Diesel-tec is located
Factory 10, East crt,
Lilydale industrial Park,
Lilydale.
Melways 38 E2
Ph 03 9739 5031.
Business hours 8.00am - 5.30pm Mon-Fri
Andy is the bloke to talk to there
http://www.diesel-tec.com.au/

Im happy to travel from Langy to Lilydale to get work done everytime, never been let down, and mine is quite happy at 130rw.

Better than the best around.
Top
Posts: 98
Joined: Mon Apr 17, 2006 3:09 pm
Location: Moorooduc, Mornington Peninsula VIC

Post by Tuflux308 »

After seeing a lot of Joel's work at PGS 4wd i would not even consider going anywhere else especially tb 42, infact all efi work

PGS 4WD
20 Bennetts Rd,
Mornington, VIC 3931

Phone:(03) 5975 2642
gq wagon now a gq ute, straight gas tb42 with a thing on the side that makes it go fast
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

OnTrack in Keable or what if it is. Just off the ring road. They have had a number of petrol turbo GQ's over the years.

Seems to be a number of people happy with PGS and DZLTEC also.
Other than Bogged I have only known people with either off the shelve or Ontrack or former employees of OnTrack kits. And they all went well.
THOUGHT FOR THE DAY....
Top
Posts: 748
Joined: Tue Nov 09, 2004 9:45 pm
Location: Lilydale

Contact:
Contact Dzltec

Post by Dzltec »

Thanks for the referrals on this, but we don't get into the petrol side of things here. Best to try the others mentioned, they all do good quality work.



Andy
www.diesel-tec.com.au Ph 03 9739 5031
Ball bearing turbo upgrades for factory turbo vehicles. Got a diesel question just ask.
Home of the twin turbo shorty and many 150rwkw+ patrols.
Top
Posts: 238
Joined: Fri Aug 24, 2007 8:57 pm
Location: Frankston Melbourne

Post by steveoo »

X 2 highly recommended

Tuflux308 wrote:After seeing a lot of Joel's work at PGS 4wd i would not even consider going anywhere else especially tb 42, infact all efi work

PGS 4WD
20 Bennetts Rd,
Mornington, VIC 3931

Phone:(03) 5975 2642
Top
Posts: 41
Joined: Fri Jul 24, 2009 1:22 pm
Location: Wodonga Vic

Post by BOOSTED GQ »

InSanE wrote:JPC is the best around mate give Mark a call on 94692566
x2 dose magic stuff with both petrol and diesel engines and very good to talk to highly recomend him.
Top
Posts: 46
Joined: Fri Oct 02, 2009 3:36 pm
Location: melbourne

Post by noisy truck »

jpc is in thomastown lipton drive i got a diesel but have also had 10 sec vl turbo that he built the engine for, i use to belt the s**t out of it and never missed a beat, a lot of comp guys go to him and keep going back, just a handy hint though he is always busy so prepare to wait a little bit.
GQ trol, 4.2td 160kw, air locked, 4" spring, 36" pedes, warn highmount, etc.

breaking it gives you an excuse to upgrade it!
Top
Posts: 1143
Joined: Sat Feb 10, 2007 6:11 pm
Location: Canberra

Post by chunks »

JPC :)
Top
Posts: 2588
Joined: Mon Apr 19, 2004 10:45 pm
Location: Hobart Tas

Post by Reddo »

turps wrote:OnTrack in Keable or what if it is. Just off the ring road. They have had a number of petrol turbo GQ's over the years.

Seems to be a number of people happy with PGS and DZLTEC also.
Other than Bogged I have only known people with either off the shelve or Ontrack or former employees of OnTrack kits. And they all went well.

I'd heard that JPC builds there motors.........

IMO,

My motor is built by JPC - great motor, that's doing the job!, not to bad, good rates, and these guys know there chickens.

Joel for PGS has great customer service, and great work. + Joel is fantastic to deal with.
Nice gq swb ute chop with a huffer for the good times
Top
Posts: 4494
Joined: Mon Nov 25, 2002 9:51 pm
Location: Golden Square

Contact:
Contact turps

Post by turps »

Reddo wrote:
turps wrote:OnTrack in Keable or what if it is. Just off the ring road. They have had a number of petrol turbo GQ's over the years.

Seems to be a number of people happy with PGS and DZLTEC also.
Other than Bogged I have only known people with either off the shelve or Ontrack or former employees of OnTrack kits. And they all went well.

I'd heard that JPC builds there motors.........

IMO,

My motor is built by JPC - great motor, that's doing the job!, not to bad, good rates, and these guys know there chickens.

Joel for PGS has great customer service, and great work. + Joel is fantastic to deal with.
They may have at some stage. The last lot of TB42's and TB48s have been built by some guy named Chris (the harmonic balancer issue wasnt his doing though). Does some great work. AdrainGQ has a TD42 blueprinted and balanced by this guy then asembled by Juzza. Turned out to be pretty sweet NA TD42 (when he gets more coin it is set for big things),
THOUGHT FOR THE DAY....
Top
Posts: 142
Joined: Mon Sep 17, 2007 8:33 pm
Location: Macedon

Post by TURBOMQ »

Speak to mark at JPC or Andrew at On Track, both do great work
mq patrol, zorst, spotties, lft ect
Top
Posts: 419
Joined: Mon Jul 02, 2007 8:00 pm
Location: Emerald vic

Post by KYSI »

PGS done my engine, couldnt be happier with it and Joel is great to deal with
Top
Posts: 158
Joined: Sun Apr 26, 2009 2:52 pm
Location: Nowra

Contact:
Contact drifter** *

Post by drifter** * »

anyone know who has experience modding 12ht's in 60 series cruisers, especially the pump? most of the people i've spoken to haven't done much with that engine.
98 GU Ti 4.5 Auto Turbo LiLPG
O2 Auto Sports
1/25 Norfolk Ave
South Nowra NSW
o2autosports@bigpond.com
0244230977 0414873727
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 65 guests