Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cut and Turn for CASH!

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 192
Joined: Mon Jul 03, 2006 12:58 am
Location: Penrith

Cut and Turn for CASH!

Post by _Mitcho_ »

hey guys

pretty much finished my 40 now all i have to do is a cut and turn on the front diff, i just want to know who does it? i contacted overkill and then can do it, but i would rather give the cash to someone on the forum, im just wondering if anyone on the forum wants to do it for abit of cash?? im in sydney and can deliver the diff on its own to you, if anyone could help me out that would be great
thanks mitch
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

It needs to be done in the vehicle.
Posts: 2254
Joined: Tue Dec 10, 2002 5:09 pm
Location: Sydney

Post by jessie928 »

vk7ybi wrote:It needs to be done in the vehicle.
no it doesent

you just need to know how many degree's you wanto rotate it.

it actually needs to be done in a JIG.

JEs
ATTACH BROKEN TOYOTA HERE--->
DUCATI <-----Worlds best warning label
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

How is it done excactly?

From the pics I've seen you use a pipe cutter to get the ends free, measure the turn and re weld.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

So how do you determine how far to rotate?
Posts: 1031
Joined: Sun May 01, 2005 10:22 pm
Location: Newcastle 2300

Post by joel HJ60 »

It's a visual thing isn't it. Keep turning until the driveshaft/uni's are at a auitable angle.

I think's it's something like 3-8 degrees? It's all over ih8mud if you have a look.
[b]1985 HJ60[/b]

[url]http://forum.ih8mud.com/60-series-wagons[/url]
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

I know where the info is, I know how to perform this operation.. I dont care how good the jig is, every vehicle is different, different height perches, different drive shaft configuration, different spring camber, different length shackles. At the end of the day its all these variables that determine the final location of the spring perch and the amount of rotation of the end housing.. It can be done out of the vehicle, but is the person doing it out of the vehicle going to be able to do it as accurately as when its in there, without having made their own measurements beforehand? I think not, therefore IMHO the proper way to perform the C&T is to do it in the vehicle. The axle housing can be removed from the vehicle for final welding.. Having the housing in a jig might help ensure the camber doesnt change..
Posts: 192
Joined: Mon Jul 03, 2006 12:58 am
Location: Penrith

Post by _Mitcho_ »

your right every vehicle is different and it can be done without the car no problem.. all you have to do is make sure the spring perchs are at the same angle as the ground and grind down the welds at both ends of the housing and turn the nuckle till its in the right position then re-weld.
i would do it myself but im just about over working on this truck plus im not 100% confident in myself to perform an operation like this one, i would rather leave it to someone who has more experience than me and who has done it before.

thanks guys
Posts: 1574
Joined: Tue Mar 21, 2006 7:34 am
Location: Greenbank - Home of the web wheelers

Post by booflux »

_Mitcho_ wrote:your right every vehicle is different and it can be done without the car no problem.. all you have to do is make sure the spring perchs are at the same angle as the ground and grind down the welds at both ends of the housing and turn the nuckle till its in the right position then re-weld.
i would do it myself but im just about over working on this truck plus im not 100% confident in myself to perform an operation like this one, i would rather leave it to someone who has more experience than me and who has done it before.

thanks guys
Yet you want to disagree with the bloke that has experience and tells you how best to perform it :roll:
Toy: 98 TJ with some mods and some bling
Tourer and daily: 120 Prado with some mods
Posts: 443
Joined: Tue Dec 25, 2007 6:03 pm
Location: Tasmania, Australia

Post by vk7ybi »

The OP has no idea.
Post Reply

Who is online

Users browsing this forum: No registered users and 20 guests