as the title says, 1986 lux, torque rod, what is its job?? i know its a part of the suspension, coming from front diff housing to chassis, ive just done the timing belt, so ive had the front of the engine bay empty, while i was in there, i noticed a crack in the welds around where the bracket where its on the chassis, its probably a bad thing, and im planning on getting it looked at tomorrow.
is it just fixed by welding it up or is it a major job??
the crack is at the top and a smaller crack at the bottom.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
what exactly does a torque rod do
Moderators: toaddog, Elmo, DUDELUX
what exactly does a torque rod do
MrsForby wrote: Oh I desperately truly love the taco.
is it an ifs truck?? i may be wrong with what i am thinking, as i am not that femiliar with them, and if it is what i think it is, (th rod that acts as the spring) my mate had a ifs pathfinder, that he had wound the front up to get some lift, but then had no give in his suspension and kept bending things...
maybe if i am on the right track and that is what your talking about, if you have wound it up, that could be your problem, that there isnt enough travle with the rod, and its putting to much stress on the mounts?? and after fixing it all you have to do is un wind it to a better tension...
if i am not correct sorry i couldnt help you.
alistair
(i jut re read your post shouldn't have missed it in the firt place, if its 1986 it would be leaf front yeah???) in that case i am incorrect and i dont know what its job is sorry mate
maybe if i am on the right track and that is what your talking about, if you have wound it up, that could be your problem, that there isnt enough travle with the rod, and its putting to much stress on the mounts?? and after fixing it all you have to do is un wind it to a better tension...
if i am not correct sorry i couldnt help you.
alistair
(i jut re read your post shouldn't have missed it in the firt place, if its 1986 it would be leaf front yeah???) in that case i am incorrect and i dont know what its job is sorry mate
Go Hard Or GO Home
It's to stop the diff rolling back and forth when the steering box pushs on the J arm.
Is your truck lifted?, if it is and you don't have an adj torque rod the cracks are from the rod limiting the suspension and therefore more load being put on the mounts, in saying that they crack eventually usually anyway.
Just clean the steel up and re weld it.
Is your truck lifted?, if it is and you don't have an adj torque rod the cracks are from the rod limiting the suspension and therefore more load being put on the mounts, in saying that they crack eventually usually anyway.
Just clean the steel up and re weld it.
Last edited by berad on Sun Oct 18, 2009 1:02 pm, edited 2 times in total.
BBP Offroad
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
That is a torsion bar.Wambat wrote:is it an ifs truck?? i may be wrong with what i am thinking, as i am not that femiliar with them, and if it is what i think it is, (th rod that acts as the spring) my mate had a ifs pathfinder, that he had wound the front up to get some lift, but then had no give in his suspension and kept bending things...
maybe if i am on the right track and that is what your talking about, if you have wound it up, that could be your problem, that there isnt enough travle with the rod, and its putting to much stress on the mounts?? and after fixing it all you have to do is un wind it to a better tension...
if i am not correct sorry i couldnt help you.
alistair
(i jut re read your post shouldn't have missed it in the firt place, if its 1986 it would be leaf front yeah???) in that case i am incorrect and i dont know what its job is sorry mate
BBP Offroad
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
Boondall Backyard Performance
They call me the MR. throw cash at shiz til its comp specccccc
but thankyou anyway
just a guess as never done one, but do it by taking it off, having the truck sitting on a level surface and loaded as it would normally be, then measuring the distance between axle and chassis brackets and adjusting accordingly. If it's the part i'm thinking of then it doesn't bear any load from the suspension. I've also done panhards this way.ferrit wrote:next question- WHen you have an adjustable, How the hell do you adjust it properly!!!
I've got adjustable control arms but they were pretty easy to calculate using good old pythagoras' therom.
i was told the best way to fit the adjustable torque rod was to: have vehicle sitting level on flat ground as it normally would, and just bolt one end in, then adjust the other end and bolt it in.
the rod ive ordered from superior engineering has left and right thread so you can adjust it while its on the car.
so im assuming that if yours has adjustment on 1 end, then youd probably have to take it off at that end.
the rod ive ordered from superior engineering has left and right thread so you can adjust it while its on the car.
so im assuming that if yours has adjustment on 1 end, then youd probably have to take it off at that end.
MrsForby wrote: Oh I desperately truly love the taco.
Who is online
Users browsing this forum: No registered users and 65 guests