Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Looking for good Diesel Tuner near Newcastle / Sydney

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 242
Joined: Sat Jun 24, 2006 1:36 pm
Location: Newcastle

Looking for good Diesel Tuner near Newcastle / Sydney

Post by bendev »

I'm thinking of building up a turbo kit for my 100 series and was wondering of a good Diesel Tuner in the Newcastle/Sydney area. I want them to run it up on there Dyno and get some readings before and after. I also want some one that knows about a Boost Compensator. So basically, any info will be appreciated.
Good Bye Grand Vitara, Hello 100 Series.
Posts: 860
Joined: Sat Mar 07, 2009 1:14 pm
Location: Newcastle

Post by ethann »

Theres a fella in Heathrebrea that specialises in 4wd dynoing.
I do have the number at home (Not home atm).
Could get it if you were interested.
Team Lock n load.
www.facebook.com/locknloadaustralia
Posts: 242
Joined: Sat Jun 24, 2006 1:36 pm
Location: Newcastle

Post by bendev »

thanks ethann,
but are they Diesel specialists?
Good Bye Grand Vitara, Hello 100 Series.
Posts: 6
Joined: Sat Apr 04, 2009 9:20 pm
Location: Newcastle

Post by bunza »

I,de be interested if you could post that info 2
Cheers
Posts: 242
Joined: Sat Jun 24, 2006 1:36 pm
Location: Newcastle

Post by bendev »

what about West End Diesel Services

http://www.westenddiesel.com.au/

what are they like?
Good Bye Grand Vitara, Hello 100 Series.
Posts: 141
Joined: Fri Nov 12, 2004 4:46 pm
Location: Newcastle

Post by mickbeny »

bendev wrote:what about West End Diesel Services

http://www.westenddiesel.com.au/

what are they like?
Hi all...Dont waste your money on a boost compensator unless you are going to squeeze big HP out of your 1HZ.Westend damaged my engine due to to high EGT.The money you spend on a dyno tuner could be better spent on EGT instruments IMHO.
PEACE...
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

dumbdunce diesel tuning did mine.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

DIRTY ROCK STAR wrote:dumbdunce diesel tuning did mine.
Do you have contact details and location?
Its not cool, unless it's got boost :)
Posts: 4
Joined: Sun Aug 30, 2009 3:41 pm
Location: NSW

Post by henlan »

bendev wrote:what about West End Diesel Services

http://www.westenddiesel.com.au/

what are they like?
I had a Surf fuel pump rebuilt by Westend Diesel many years ago, and by the time they had finished I could have purchased a brand new engine. I was young and naive and they ripped me off big time. This was about 10 years ago and they were getting a big wrap in 4WD Monthly magazine at the time, and the boss was a guy called Devesh I think.

However the engine ran very well after they had finished... but $5k for a fuel pump rebuild isn't right, no matter how gullible the customer. Live and learn.
Posts: 6021
Joined: Sat Feb 15, 2003 11:01 pm
Location: Shed.

Post by dumbdunce »

there isn't much to "tune" on a 1HZ unless you install a boost compensator, and a boost compensator is PRIMARILY an emission control device. basically if you don't mind a bit of a puff of smoke on initial acceleration, you can live with <10psi boost (and that's a pretty good boost limit for 1HZs regardless of intercooling) and you are prepared to change your oil every 5000km just like the book says, you don't need a boost compensator.

if you are capable of building/installing your own turbo kit, you can tune your engine to suit - there is only one screw to adjust, clockwise for more fuel, ccw for less. start with about a half turn and use your EGT gauge to determine when is enough. 650C pre turbo is pretty safe even for later 1HZs.

summary: spend the money you would have spent on tuning, on an EGT gauge and road tune it. the only "downside" is that you don't get dyno numbers, but dyno sheets are often misleading anyway. a g-tech or even an ipod/iphone with dyno software coupled with an accurate weighbridge ticket will yield surprisingly accurate results especially for before/after comparison purposes.

cheers

DD
Free air locker to the first 20 callers!
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Post by MARKx4 »

I just had my car at westend diesel and i wouldnt yse them again. They charge like wounded bulls and very slow, they too 3 1/2 days to service injectors and adjust timing on fuel pump and put it on a dyno once...

I will not go back to them again, if i need to put it on a dyno im going to go to the local performance shop that has been around for years. I have spoken to them and even though they mainly do petrol engines they also know how to adjust turbo boost and fuel supply on the diesel which is all i want to do after i fit my intercooler.
Its not cool, unless it's got boost :)
Post Reply

Who is online

Users browsing this forum: No registered users and 87 guests