Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ tyre options?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 21
Joined: Tue May 05, 2009 3:22 pm
Location: Auckland

GQ tyre options?

Post by bobrocket »

A bit new to 4wd scene and have no idea on where to start on tires, have 15x8 rims -20 offset and currently bald tires, no suspension upgrades yet, no planned body lift, have cut the rear quarters and have no problem taking the corners of the front bumper off.
I'm sliding towards the Kumho KL71's and was thinking of 33" but the nice tire dealer will give me 35's at a cheaper price. NZD$1500 inc fitting and balance, $1650 for the 33's, where did others start? I don't have a huge budget, just doing a bit at a time (91 LWB Safari)
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: GQ tyre options?

Post by bogged »

Posts: 177
Joined: Mon Sep 28, 2009 10:03 pm
Location: caboolture

Post by anzac »

33"s will save you more $$$$ in long run because you only need a 2" lift vs at least 4 for 35"s. Nearly double the money to go the extra 2" properly.

There's not too many places you'll go where a 35 is that much better than a 33. Just remember to drive to suit the size tyres you have.

Also remember that the bigger and heavier the tyre you fit, the more power at the wheels you will sacrifice. The patrol safaris aren't exactly rolling in it when it comes to power stakes.

Those prices, were they for a set of 5 or only 4
Posts: 409
Joined: Thu Mar 20, 2008 7:43 am
Location: Aus

Post by macneil »

anzac wrote:33"s will save you more $$$$ in long run because you only need a 2" lift vs at least 4 for 35"s. Nearly double the money to go the extra 2" properly.

There's not too many places you'll go where a 35 is that much better than a 33. Just remember to drive to suit the size tyres you have.

Also remember that the bigger and heavier the tyre you fit, the more power at the wheels you will sacrifice. The patrol safaris aren't exactly rolling in it when it comes to power stakes.

Those prices, were they for a set of 5 or only 4
well for starters you can run 35's on a 2" lift no problems just chop the whole guard a little bit.. if you can cut quaters you can do this..

and any way for the same price u can get a 3" lift kit and run 35's with minimal chopping..

how ever if you run 35's all day they will cost you a bit more in fuel.. well a fairbit more.. so you might want to change the diff ratios to 4.6
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

macneil wrote:well for starters you can run 35's on a 2" lift no problems just chop the whole guard a little bit..
You can run 38's with no lift doing that too....
Posts: 21
Joined: Tue May 05, 2009 3:22 pm
Location: Auckland

Post by bobrocket »

So over time.........Buy 33's and chop the guards.......2" lift for xmas........make the next set 35"? Unfortunately the budget dictates tires before lift due to excessive wear.

Those prices are for five tires,

I just don't want to start chopping and turn it into a 6 month rebuild, a little chopping is o.k but the wife............

How major is it to run the 35"s? do you actually need to change ratios or is it something that can go the list?

I like the idea of 38"s but I started at 33's, then i found out I can save $$$ by getting the same tire in 35", Its a cruel world...
Posts: 413
Joined: Sun Apr 27, 2008 8:41 am
Location: South Is, NZ

Post by twodiffs »

Mate I ran 33's for years, had 4" lift with no quarter cut, radius arm spacing or front guard cut, the 33 is a good size tyre and doesn't affect the gearing too badly. You will/would get some scrubbing on the inner rear guards though unless you set your bumpstops up.

Now have 35" on 4" lift (truck #2) with 40mm b/lift, quarter cut guards with drop boxes and trimmed front guards, the gearing difference doesn't bother me that much as it still gets along quite well. I went to 35"s because they quoted $100 difference between BFG 33's. I'm sticking with 35's permanently now.

For 35's - trim the guards, and stick with the idea of no body lift.
I noticed a big difference with clearance and driveability with the 35's over the 33's so go for it.
1991 GQ TD42 Safari, 5spd, 4" Lift, 35" shovels, Locked & Loaded.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

Why dont you just go and drive the car before spending a cent on it?

find out what you think is lacking, what your willing to accept, and put off? No point buying 33's then being pist cause your suspension is totally fucked, or something else is rooted, and then spend the next 5 yrs broke fixing shit..
Posts: 21
Joined: Tue May 05, 2009 3:22 pm
Location: Auckland

Post by bobrocket »

I have been driving the safari for a while on the factory tires and rims, its that time to buy new tires to keep it road worthy,
Take the next step and see how much further I can push it.
It has been taken all over the country and the thing it seems to lack is clearance and traction, hence the reason for mud tires, the differance is now I'm doing it for fun not work

At the moment I have 245/75/R16 AT about 30.5", at full articulation they hit the inner guard, 31" on offset rims is sweet with a bit of space to fill.

The tire guy seems pretty straight up and is willing to try a few different sizes and brands so I can see how much where...........etc, his curiosity seems to be in my favor.

Will have a look this weekend and keep you posted,
appreciate the help.
User avatar
RN
A speed camera would have prevented that!
Posts: 15822
Joined: Sat Feb 05, 2005 3:46 pm
Location: Check your six.

Post by RN »

bobrocket wrote:I have been driving the safari for a while on the factory tires and rims, its that time to buy new tires to keep it road worthy,
Take the next step and see how much further I can push it.
It has been taken all over the country and the thing it seems to lack is clearance and traction, hence the reason for mud tires, the differance is now I'm doing it for fun not work

At the moment I have 245/75/R16 AT about 30.5", at full articulation they hit the inner guard, 31" on offset rims is sweet with a bit of space to fill.

The tire guy seems pretty straight up and is willing to try a few different sizes and brands so I can see how much where...........etc, his curiosity seems to be in my favor.

Will have a look this weekend and keep you posted,
appreciate the help.
I thought you were running 15's.
I am the Nightrider! I am the chosen one. The mighty hand of vengeance, sent down to strike the unroadworthy!
Posts: 21
Joined: Tue May 05, 2009 3:22 pm
Location: Auckland

Post by bobrocket »

Sorry, to clarify, I have 15x8 rims which I plan to put the new tires on and am running 245/75/R16 AT on the truck now.
Posts: 32
Joined: Tue Nov 17, 2009 7:03 pm
Location: Perth

Post by Chopz »

bogged wrote:Why dont you just go and drive the car before spending a cent on it?

find out what you think is lacking, what your willing to accept, and put off? No point buying 33's then being pist cause your suspension is totally ., or something else is rooted, and then spend the next 5 yrs broke fixing shit..
maybe you should read what he was trying to say at the start of the thread instead of trying to handball him off to other posts :roll:
Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests