Hi All
100 series part time with standard split rims and 7.5 r16s.
I am looking at getting 4x 235/85/16 and using the 7.5's as spares.
I have calculated a 7.5mm difference in height between the two sizes.
Is that enough to cause wind up/damage?
I can remember dad running new tyres on the back and worn tyres on the front which would have had a similar difference in height without damaging anything
any help would be appreciated.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
tyre size and wind up..
Moderators: toaddog, TWISTY, V8Patrol, Moderators
its probably not enough to notice, but it will be there... however you'll only get windup if you're using 4wd on road - in offroad situations the fronts will just break traction and spin a little now and then.
I ran odd fronts and rear in my zuk for a long time and had no damage.
I ran odd fronts and rear in my zuk for a long time and had no damage.
The worst thing about censorship is ███████.
Who is online
Users browsing this forum: No registered users and 1 guest