Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

PTO for Patrol 60

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 6
Joined: Sat Nov 01, 2008 9:12 am
Location: Poland

PTO for Patrol 60

Post by Y60GR »

Hi.
Is it possible to fit:
PTO Patrol MQ 3,3D -- Gearbox Patrol L60 4,0 (P engine).
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

yes its the same gear box if both 5 speed. Only input shafts are different.

Im looking for factory pto gearbox that bolts on the side of box. If you guys have a spare one id be real keen. only need that part nothing else
Top
Posts: 6
Joined: Sat Nov 01, 2008 9:12 am
Location: Poland

Post by Y60GR »

pongo wrote:yes its the same gear box if both 5 speed.
Gearbox in L60 is 3 speed and in MQ is 5 speed.
This is impossible to buy PTO for Patrol L60 (in Europe), but it is possible for Patrol MQ 3,3D. In my opinion both PTOs are wery similar, but this is only my opinion. I must be sure :)
Top
Posts: 6
Joined: Sat Nov 01, 2008 9:12 am
Location: Poland

Re: PTO for Patrol 60

Post by Y60GR »

Y60GR wrote:Hi.
Is it possible to fit:
PTO Patrol MQ 3,3D -- Gearbox Patrol L60 4,0 (P engine).
Nobody knows? :roll:
Top
Posts: 210
Joined: Mon Jun 27, 2005 9:13 pm

Post by Sterlo »

which PTO, the one in the side of the box of the one on the end of the transfer? I know the transfer one will fit both
Top
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

Sterlo wrote:which PTO, the one in the side of the box of the one on the end of the transfer? I know the transfer one will fit both
i have the one on the end of the transfer now, but am looking for the one that goes onto the side of the box. Just looks as though the box mounted one would be tougher as the tranny one bolts onto the rear splines and the splines in mine are about shagged from last owner abuse.
Top
Posts: 6
Joined: Sat Nov 01, 2008 9:12 am
Location: Poland

Post by Y60GR »

Sterlo wrote:which PTO, the one in the side of the box of the one on the end of the transfer? I know the transfer one will fit both
The one in the side of gearbox. I need it for original winch (front).
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 79 guests