Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

arb wirering problem

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 42
Joined: Sat Mar 14, 2009 6:45 am
Location: north canterbury nz

arb wirering problem

Post by mikebarnett »

hi,ive had my lockers for just over 4 years now with no problems at all.then the other night while going to my club meeting the switches glowed extra bright when i turned my lights on and the compreser is only going at half speed if that and is very quite compered to normal every thing is working just all mucked up,any idears would be great ,thanks mike.
Top
Posts: 42
Joined: Sat Mar 14, 2009 6:45 am
Location: north canterbury nz

Post by mikebarnett »

the truck is 24 volt so is the compressor
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

This is very hard to diagnose on that info but it sounds like MAYBE you could start by looking at the switch.

Swap an el cheapo switch in or just make a temporary connection with a wire and see if the compressor then works normally. Just an idea, it is definitely not the only possible issue.
This is not legal advice.
Top
Posts: 42
Joined: Sat Mar 14, 2009 6:45 am
Location: north canterbury nz

Post by mikebarnett »

thanks i will try that,all 3 switches get so hot you cant touch them for very long and very very bright compared to usual
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Actually if there are three switches and they are all doing the same thing, it kind of makes it seem like it wouldn't be the switches.
This is not legal advice.
Top
Posts: 42
Joined: Sat Mar 14, 2009 6:45 am
Location: north canterbury nz

Post by mikebarnett »

yeah thats what i thought to but thanks ,im going to get an auto sparky to ave a quick look at it just doesnt make sence that one day fine next day everything all messed up
Top
Posts: 54
Joined: Mon Jan 30, 2006 6:33 pm
Location: blue haven

Post by grubb »

you haven't changed the switch's lately have you and been given 12 volt switch's
Top
Posts: 42
Joined: Sat Mar 14, 2009 6:45 am
Location: north canterbury nz

Post by mikebarnett »

no every thing is still the same as when it was installed 4 years ago think it mite have blowen something in the wirering some how if i get time today i'll get a sparky to run a test
Top
Posts: 239
Joined: Thu Aug 07, 2003 2:27 pm
Location: Mongol land

Post by GeneralFubashi »

I dont have an arb compressor or anything, but is it possible the ground on the compressor is broke, and its now grounding back through the lights on the switches. Would account for the loss in power of compressor, having to complete the circuit through a higher resistance path? Having said that I have no idea how ARB wire their switches.
'79 Bj40, '81 Hj47 Trayback, '86 Hj61 Turbo Auto, '02 Y61 St Coilcab Turbo
Top
Posts: 42
Joined: Sat Mar 14, 2009 6:45 am
Location: north canterbury nz

Post by mikebarnett »

just read last comment raced out and tryed it but no luck thanks anyway
Top
Posts: 42
Joined: Sat Mar 14, 2009 6:45 am
Location: north canterbury nz

Post by mikebarnett »

yahoo problem solved had a new battery put in and the earth wire and the negative wire got swapped around by mistake everything back to normal now...[the earth and neg wires for the arb that is] many thanks to all that replyed ,cheers mike.
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 10 guests