Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GQ cluch fan

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 56
Joined: Mon Feb 09, 2009 9:54 pm
Location: Dromana

GQ cluch fan

Post by Jake GQ.. »

my cluch fan has died and the price of a new one is a bit out there. would it be possible to get rid of it and install el thermo fans instead. cheers thanks for your time
Posts: 1060
Joined: Mon Feb 14, 2005 8:05 pm
Location: Kilsyth, Victoria

Post by hokey »

anything is possible?

from what i've seen thermo fans never work aswell as a clutch fan. that's mostly due to dodgy installations though.

use the factory fan shroud and mount setup and i reckon it'd be pretty good
Posts: 1350
Joined: Tue Nov 25, 2008 4:48 pm
Location: Sunshine Coast - Brisbane

Post by money_killer »

i would just stick to a clutch fan
94 Patrol Petrol 3.0L lift, tyres, winch
90 WT Serria locked diff, Muddies
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Re: GQ cluch fan

Post by JWB »

Jake GQ.. wrote:my cluch fan has died and the price of a new one is a bit out there. would it be possible to get rid of it and install el thermo fans instead. cheers thanks for your time
From what I've read on here, thermo fans very, very rarely work as well
as the factory clutch fan does.

YMMV
JB
Posts: 1918
Joined: Mon Sep 26, 2005 6:03 pm
Location: Victoria

Post by Jimbo »

Drill 2 holes in the hub and inject silicon oil bought from toyota. Use a couple of screws to seal it up and off you go. I have done it a few years ago and its still great
GQII Patrol YAY!!
Posts: 420
Joined: Thu Sep 20, 2007 10:15 pm
Location: on acid...:)

Post by tanz-e »

Jimbo wrote:Drill 2 holes in the hub and inject silicon oil bought from toyota. Use a couple of screws to seal it up and off you go. I have done it a few years ago and its still great
is this really necessary?
ive replaced one mine about a month ago in a car ive been thrashen since 2002?? done nearly 4 hundred k's...s
Posts: 199
Joined: Sat May 24, 2008 6:07 pm
Location: central coast

...

Post by morewheeldrive »

Unless u can find a thermo fan that can pump out as much air flow as the stock viscouse I wouldn't go muckin around trying to change things. Manufacturers match a fan with a cooling system to work specifically for that application. U could do it hard core and put In a big desert cooler radiator and run a big truck oil cooler fan on a 24v system. That would give u piece of mind. But massive overkill
Posts: 55
Joined: Wed May 21, 2008 6:13 pm
Location: LEONGATHA, VICTORIA

GQ clutch fan

Post by BLUE MQ »

I have a 1990 GQ LWB 4.2 duel fuel auto, I have mounted a set of EF falcon twin thermo's onto my original radiator and have had no troubles at all, I live in western Victoria where it gets dam hot. If you do the conversion make sure you get the fans that one is a duel speed, the whole fan shroud will mount straight onto a standard GQ radiator. I have it hooked up so that the single speed fan is hooked to the ignition thru a relay, also a switch on the dash to turn it off if going thru water, then the other fan is ran thru duel relays to a multi position switch on the dash, marked "LOW & HIGH", but so far I have only ever used the low speed a couple of times in the bush on hot days when just crawling around slowly. I plan to hook up the main fan through a temp switch but I may not. It all works great now. I picked up th EF fans from EBAY including postage for $65, then go to a wreckers and get an ea-ed bank of relays cutting enough wire to rejoin and hook it all up. But that is just my 2 cents worth.
Posts: 536
Joined: Mon Apr 18, 2005 2:59 pm
Location: sydney

fans

Post by micka1 »

I and a couple of mates have tried electric fans on our petrol and diesel gqs - all with proper shrouds / twin fans and relays. and none of them have worked too well , we still had over heating problems with them here in nsw .
We all ended up putting our clutch driven fans back on , after we refilled them with the silicone that Jimbo said previously we got from toyota, was about $12 if i remember , and this fixed all our problems with over heating .
Or you could just go buy a new coupling from repco or similar i think they are around $150 new .
Posts: 131
Joined: Fri Nov 07, 2003 11:59 am
Location: Fraser Coast Qld

Post by Tailspin »

Try Blackburn 4x4 or Ebay seller matts0510, They sell genuine Nissan gear at very good prices.
I have bought a Genuine fan clutch from them for around $120 not too sure as I've bought a bit of stuff there, Give them a try.
Fraser Island tour bus drivers suck!!

www.waterfrontrestaurant.info
www.frasercoast4wdclub.com
www.coastal4x4.com.au
1988 GQ 4.2TD, 2002 GU 3.0TD Wagon, 1987 HJ75 Ute.
Post Reply

Who is online

Users browsing this forum: No registered users and 143 guests